Zerrendatu Artikuluak-Ingeniaritza honen arabera: izenburua
608-tik 19-38 emaitza erakusten
-
Analysis and Evaluation of a Wired/Wireless Hybrid Architecture for Distributed Control Systems With Mobility Requirements
(IEEE, 2019)Wireless communications offer significant benefits over wired communications, which has increased their popularity in industrial applications. Nevertheless, the existing wireless standard technologies do not satisfy the ... -
Analysis of One-Way and Two-Way FSI Approaches to Characterise the Flow Regime and the Mechanical Behaviour during Closing Manoeuvring Operation of a Butterfly Valve
(World Academy of Science, Engineering and Technology, 2018)Butterfly valves are widely used industrial piping components as on-off and flow controlling devices. The main challenge in the design process of this type of valves is the correct dimensioning to ensure ... -
Analysis of Permanent Magnet Motors in High Frequency: A Review
(MDPI, 2021)Electric drives consume a great amount of the world’s energy, and it will keep increasing due to the electromobility trend. Thus, the efficiency of electric drives must be improved to reach the desired sustainability goal. ... -
Analysis of technological architectures for the new paradigm of the industry 4.0
(DYNA Publishing, 2019)The present work defines an interoperable and scalable architecture that will allow the servitization of the machine tool sector. ICT and the Internet of Things make possible to interconnect different devices and controllers, ... -
Analysis of the mechanical and microstructural fluctuations of high-strength steels and their effect on bending angle
(MDPI, 2023)The quality and complexity demands of manufactured parts in sectors such as automotive and aeronautics lead to narrower process windows. This affects the repeatability and stability of the process, where material properties ... -
An analysis of the organisational factors that determine education-related university-business cooperation activities in manufacturing SMEs
(Taylor and Francis, 2022)Cooperation between universities and business is manifest in a wide range of activities related to the three missions of the entrepreneurial university: education, research and entrepreneurship. However, the vast majority ... -
Analysis of the pilot survey INKLUGI about aging and disabilities to promote Inclusive Design in industry
(Routledge, 2019)This study is part of the project INKLUGI. The main objective of the project is to create new tools that help to introduce Inclusive Design methods in the industry of the region of Gipuzkoa. To make companies understand ... -
An Analysis of the Spanish Universities' Entrepreneurial Activities through Secondary Data (Websites and Reports)
(Allied Business Academies, 2020)Over the past few years, there has been a growing number of studies indicating that entrepreneurial activities performed at universities, such as cooperative research and the creation of spin-offs or patents and licenses, ... -
Analysis of thermophoresis for separation of polystyrene microparticles in microfluidic devices
(Elsevier, 2022)We analysed the thermodiffusion phenomenon both numerically and experimentally for size-based separation of polystyrene microparticles. For model validation, we followed previously published numerical studies using ANSYS ... -
An analytical approach to calculate stress concentration factors of machined surfaces
(Elsevier Ltd., 2021)Machining operations affect the properties of the final surface layer, and these can impact on its functional per- formance, particularly on fatigue behaviour. Among the properties of the machined surface, surface topography ... -
An analytical model of through-thickness photopolymerisation of composites: Ultraviolet light transmission and curing kinetics
(Elsevier, 2020)In this paper, a kinetic model able to predict the evolution of the through-thickness degree of cure of ultraviolet (UV) cured composites has been developed and validated. The kinetic model, which is based on the autocatalytic ... -
Analytical Model to Calculate Radial Forces in Permanent-Magnet Synchronous Machines
(MDPI, 2021)There are three principal sources of noise and vibration in electrical machines: electromagnetic sources, mechanical sources, and aerodynamic sources. Nowadays, one of the major advantages of permanent-magnet synchronous ... -
Analytical Modeling Approach to Study Harmonic Mitigation in AC Grids with Active Impedance at Selective Frequencies
(MDPI AG, 2018)This paper presents an analytical model, oriented to study harmonic mitigation aspects in AC grids. As it is well known, the presence of non-desired harmonics in AC grids can be palliated in several manners. However, in ... -
Anomaly Detection and Automatic Labeling for Solar Cell Quality Inspection Based on Generative Adversarial Network
(MDPI, 2021)Quality inspection applications in industry are required to move towards a zero-defect manufacturing scenario, with non-destructive inspection and traceability of 100% of produced parts. Developing robust fault detection ... -
Aplicación de un sistema de gestión del mantenimiento basado en un RCM adaptado
(Dyna, 2014)This paper presents the results of the application of an adapted version of the RCM (Reliability Centered Maintenance) methodology. Through its implementation, three companies of distinct industrial sectors have been capable ... -
Application Dependent End-of-Life Threshold Definition Methodology for Batteries in Electric Vehicles
(MDPI, 2021)The end-of-life event of the battery system of an electric vehicle is defined by a fixed end-oflife threshold value. However, this kind of end-of-life threshold does not capture the application and battery characteristics ... -
Application of the D3H2 Methodology for the Cost-Effective Design of Dependable Systems
(MDPI AG, 2019)The use of dedicated components as a means of achieving desirable levels of fault tolerancein a system may result in high costs. A cost effective way of restoring failed functions is to use heterogeneous redundancies: ... -
Aproximación multimétodo para medir el impacto de los factores de diseño en la apropiación de un software de inteligencia competitiva
(Dyna, 2020)La industria 4.0 y una vida laboral en continua transmutación, plantean preguntas acerca de cuáles serán las competencias que requerirán las personas para la correcta apropiación tecnológica y la mejora del desempeño. Este ... -
Artificial Neural Network Based Reinforcement Learning for Wind Turbine Yaw Control
(MDPI AG, 2019)This paper introduces a novel data driven yaw control algorithm synthesis method based on Reinforcement Learning (RL) for a variable pitch variable speed wind turbine. Yaw control has not been extendedly studied in the ... -
Aspects Concerning the Fabrication of Magnetorheological Fluids Containing High Magnetization FeCo Nanoparticles
(MDPI, 2021)Recently, our collaborative work in the fabrication of a magnetorheological fluid (MRF) containing high magnetization FeCo nanoparticles (NPs, fabricated in our laboratories using the chemical reduction technique; MS = 212 ...
