Browsing Ikerketa-Kongresuak by Issue Date
Now showing items 1-20 of 144
-
Phase transformation fronts propagation during the Stress Induced Martensitic transformation in NiTi Shape Memory Alloy wires at impact strain rates
(EDP Sciences, 2009)Propagation of phase transformation fronts during the stress induced martensitic (SIM) transformation at impact strain rates, on the order of 10 s-1, was observed in situ by measuring changes in infrared radiation on the ... -
A comparative study of residual stress profiles on Inconel 718 induced by dry face turning
(Elsevier, 2011)Residual stress profiles induced by different dry face turning conditions are compared employing X-ray diffraction method, Hole-Drilling method and Finite Element Modelling. It is well known that the surface integrity ... -
Analysis of different inhibitors for magnesium investment casting
(IOP Publishing, 2011)Investment casting of magnesium is a well suited process for the production of aeronautic and automotive components. But still, this process has not been properly developed. One reason for that are the reactions between ... -
Personalised Trachea Stent Designer: a Knowledge Feature
(Elsevier, 2012)Modelling of anatomical parts is usually tackled through triangulated models with specialised Bio-CAD applications. If features beyond anatomy are required, geometry is usually translated into NURBS geometry for further ... -
Fluido magnetikoen portaera magneto-reologiko eta biskoelastikoa
(Mondragon Unibertsitateko Zerbitzu Editoriala, 2012)Fluido magnetikoak likido eramaile eta partikula magnetikoez daude osatuta, eta beraien portaera aplikatutako eremu magnetikoaren menpekoa da. Lan honetan, olio mineralez, sufaktante batez, likatzaile batez eta partikula ... -
Effect of heat Treatment Conditions on the Machinability of Ti64 and Ti54 M Alloys
(Elsevier, 2012)Orthogonal tests on cylindrical workpieces were carried out to analyze the effect of heat treatment on the machinability of newly developed Ti54M titanium alloy in comparison with Ti64. This paper focuses on the comparison ... -
Machining behaviour of Ti-6Al-4V and Ti-5553 alloys in interrupted cutting with PVD coated cemented carbide
(Elsevier, 2012)Machining behaviour of Ti-5553, Ti-6Al-4 V mill-annealed (MA) and Ti-6Al-4 V solution treated and aged (STA) alloys was studied in different interrupted cutting operations using PVD coated cemented carbide tools. Single ... -
Evolution of Surface Roughness in Grinding and its Relationship with the Dressing Parameters and the Radial Wear
(Elsevier, 2013)Grinding is a machining process specially indicated for finishing operations in hard materials, in order to obtain low surface roughness (Ra 0.1 μm to 2μm) and tight tolerances. The cutting tool is the grinding wheel which ... -
Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining
(Elsevier, 2015)Ti6Al4 V is a titanium alloy widely used in the aeronautical industry and machining is often adopted to manufacture it. These parts must satisfy requirements specified by the customer. A crucial characteristic of aircraft ... -
Novel SHM method to locate damages in substructures based on VARX models
(IOP, 2015)A novel damage localization method is proposed, which is based on a substructuring approach and makes use of Vector Auto-Regressive with eXogenous input (VARX) models. The substructuring approach aims to divide the monitored ... -
Finding correlations between tool life and fundamental dry cutting tests in finishing turning of steel
(Elsevier, 2015)Tool life is usually measured by end tool life tests, however, such experiments are costly and time consuming. Establishing correlation between these tests and shorter and cheaper tests is consequently of great interest. ... -
Vibration attenuation of conductive beams by inducing eddy currents
(IOP, 2016)The increasing requirements for structural vibration control in many industries, require innovative attenuation techniques. In this work, the phenomenon of eddy currents is proposed to reduce the ... -
The transformation of society at the centre of a co-operative university’s mission
(UNIKE, 2016)Mondragon Unibertsitatea (MU) is a young university created in 1997 whose roots date back to 1943. MU is a non-profit worker-owned co-operative university, of public interest, and a member of MONDRAGON Corporation, with a ... -
Cyber Physical System Based Proactive Collaborative Maintenance
(IEEE, 2016)The aim of the MANTIS project is to provide a proactive maintenance service platform architecture based on Cyber Physical Systems. The platform will allow estimating future performance, predicting and preventing imminent ... -
Relationship between the use of ICT and the degree and type of diversification
(Elsevier, 2016)Advances in information and communication technologies (ICT) has given way to a new genre of opportunities for companies expanding their horizons to explore new markets and to diversify their business. In this sense, the ... -
Accurate drawbead modeling in stamping simulations
(IOP Publishing, 2016)An adaptive line bead model that continually updates according to the changing conditions during the forming process has been developed. In these calculations, the adaptive line bead's geometry is treated as a 3D object ... -
Influence of tool wear on residual stresses when turning Inconel 718
(Elsevier, 2016)This paper analyzes the effect of tool wear on residual stresses when turning. Inconel 718 discs were machined for prolonged periods at several cutting speeds, feed-rates and depth of cut. Tests were interrupted to measure ... -
On the Feasibility of Distinguishing Between Process Disturbances and Intrusions in Process Control Systems using Multivariate Statistical Process Control
(IEEE, 2016)Process Control Systems (PCSs) are the operat-ing core of Critical Infrastructures (CIs). As such, anomalydetection has been an active research field to ensure CInormal operation. Previous ... -
Roll levelling semi-analytical model for process optimization
(IOP, 2016)Roll levelling is a primary manufacturing process used to remove residual stresses and imperfections of metal strips in order to make them suitable for subsequent forming operations. In the last years the importance of ... -
Sensitivity analysis on an AC600 aluminum skin component
(IOP, 2016)New materials are been introduced on the car body in order to reduce weight and fulfil the international CO2 emission regulations. Among them, the application of aluminum alloys is increasing for skin panels. Even if these ...
