Bilatu
17-tik 1-10 emaitza erakusten
Electric Vehicle Inverter Electro-Thermal Models Oriented to Simulation Speed and Accuracy Multi-Objective Targets
(MDPI AG, 2019)
With the increasing demand for electric vehicles, the requirements of the market are changing ever faster. Therefore, there is a need to improve the electric car’s design time, where simulations could be an appropriate ...
Impact of silicon carbide devices in 2 MW DFIG based wind energy system
(IEEE, 2020)
Renewable energies are going through a major increment, mainly wind and photovoltaic energies, being market competitiveness the main driver for their massive penetration. As power converters are used to interface renewable ...
System Level Optimization of 5 MW Wind Converter using 3L-NPC Topology in Medium Voltage with 1 . 7 kV IGBT
(IEEE, 2020)
Market competitiveness is the main driver in the massive adoption of wind energy, and the optimization of the power converter is crucial for this purpose. Because it has higher efficiency than the two level Voltage Source ...
Experimental verification of the AC resistance effect in Insulated Metal Substrate based Power Converters
(IEEE, 2023)
Insulated Metal Substrate (IMS) based power converters are an excellent solution for thermal dissipation of power converters, but they suffer for limited layer options generating parasitic elements specially in High ...
DC-link Voltage Balancing Strategy based on SVM and Reactive Power Exchange for a 5L-MPC Back-to-Back Converter for Medium Voltage Drives
(IEEE, 2016)
The reduced capability of multilevel converters with more than one intermediate node to balance the dc-link capacitors voltage, as well as the lack of standard modulation methods to improve their balancing performance, ...
Simple voltage balancing method to protect series-connected devices experimentally verified in a 5L-MPC converter
(IEEE, 2018)
This paper presents a solution for the voltage balance problem of the series-connected devices that can be applied to multilevel converters in which the series-connected devices need to block twice their switched voltage. ...
DC-Link Neutral Point Control for 3L-NPC Converters Utilizing Selective Harmonic Elimination PWM
(IEEE, 2021)
Selective harmonic elimination–pulsewidth modulation (SHE–PWM) is a modulation technique widely used to improve the efficiency and harmonic content in medium-voltage high-power converters. Among these converters, the ...
Medium voltage-high power converter topologies comparison procedure for a 6.6kV Drive Application using 4.5kV IGBT Modules
(IEEE, 2012)
This paper presents a general comparison procedure for medium voltage - high power multilevel converter topologies and semiconductors, which is mainly based on analyzing the performance limits of the converters output ...
Comprehensive analysis of voltage balancing techniques for 5L NPC converters
(IEEE, 2013)
The reduced capability of the 5L-NPC Inverter to balance the voltages of the four DC-bus capacitors makes this converter unattractive for real power applications. This is especially true if the load demands active power. ...