Bilatu
30-tik 1-10 emaitza erakusten
A numerical analysis of multiaxial fatigue in a butt weld specimen considering residual stresses
(EDP Sciences, 2018)
Residual Stress (RS) pattern changes considerably depending on the width of the plates and the welding parameters, having effect on the fatigue strength. Most of the standards do not consider them and in some works, yield ...
Development of a Modular Fretting Wear and Fretting Fatigue Tribometer for Thin Steel Wires: Design Concept and Preliminary Analysis of the Effect of Crossing Angle on Tangential Force
(MDPI AG, 2019)
This work presents the design of a modular ad-hoc fretting fatigue and fretting wear tribotester for thin steel wires. The working principles of the diffrent modules are described, such as the displacement and contact ...
An ad-hoc fretting wear tribotester design for thin steel wires
(EDP Sciences, 2018)
Steel wire ropes experience fretting wear damage when the rope runs over a sheave promoting an oscillatory motion between the wires. Consequently, wear scars appear between the contacting wires leading to an ...
On the Role of Contact and System Stiffness in the Measurement of Principal Variables in Fretting Wear Testing
(MDPI AG, 2020)
In this work, the role of the contact stiffness in the measurement of principal variables in fretting wear tests is assessed. Several fretting wear tribometers found in the literature, including one developed by the authors, ...
The use of areal surface topography characterisation in relation to fatigue performance
(EDP Sciences, 2018)
Although the effect of surface topography on fatigue life is widely accepted, the underlying role of surface roughness from first principles is still poorly understood. Currently approaches which consider the ...
Influence of Surface Finish and Porosity on the Fatigue behaviour of A356 Aluminium Casting Alloy
(EDP Sciences, 2018)
In casting parts, due to the manufacturing process, the presence of defects such as porosity, inclusions and oxide films is unavoidable. All these irregularities have a negative effect on the component ...
Simulación numérica y validación experimental de fenómenos de desgaste y fatiga por fretting en aceros trefilados de reducido diámetro
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2016)
Many mechanical components such as, bearing housings, exible couplings and spines or steel wires are simultaneously subjected to fatigue and fretting damage. Fretting phenomenon arises when two bodies are in contact subjected ...
On the Role of a ZDDP in the Tribological Performance of Femtosecond Laser-Induced Periodic Surface Structures on Titanium Alloy against Different Counterbody Materials
(MDPI, 2019)
Laser-induced periodic surface structures (LIPSS, ripples) with ~500–700 nm period were produced on titanium alloy (Ti6Al4V) surfaces upon scan processing in air by a Ti:sapphire
femtosecond laser. The tribological ...
Surface integrity of additive manufacturing parts: a comparison between optical topography measuring techniques
(Elsevier B.V., 2020)
Additive Manufacturing (AM) presents significant industry-specific advantages allowing the creation of complex geometries and internal features that cannot be produced using conventional manufacturing processes. However, ...