xmlui.dri2xhtml.METS-1.0.item-share
Save the reference
Title
Effect of heat Treatment Conditions on the Machinability of Ti64 and Ti54 M Alloys
xmlui.dri2xhtml.METS-1.0.item-contributorOtherinstitution
https://ror.org/001p3jz28Version
http://purl.org/coar/version/c_970fb48d4fbd8a85
Rights
© 2012 The AuthorsAccess
http://purl.org/coar/access_right/c_abf2Publisher’s version
http://dx.doi.org/10.1016/j.procir.2012.04.085Published at
Procedia CIRP Vol. 1. Pp 477-482, 2012Publisher
ElsevierKeywords
Titanium alloys
Heat treatment
Microstructure
Cutting forces ... [+]
Heat treatment
Microstructure
Cutting forces ... [+]
Titanium alloys
Heat treatment
Microstructure
Cutting forces
Temperature
Chips [-]
Heat treatment
Microstructure
Cutting forces
Temperature
Chips [-]
Abstract
Orthogonal tests on cylindrical workpieces were carried out to analyze the effect of heat treatment on the machinability of newly developed Ti54M titanium alloy in comparison with Ti64. This paper foc ... [+]
Orthogonal tests on cylindrical workpieces were carried out to analyze the effect of heat treatment on the machinability of newly developed Ti54M titanium alloy in comparison with Ti64. This paper focuses on the comparison of forces and temperature of the tool during dry orthogonal cuttings of Ti64 and three different heat treated Ti54M alloys. Forces and temperature are mainly affected by variation in cutting speed and feed, therefore, the depth of cut is maintained constant while cutting speed and feed are varied. Forces and temperature have been measured and chips are analyzed to establish a direct relationship between machinability and the different heat treatment conditions. [-]
Collections
The following license files are associated with this item:
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 International
