• Experimental-Based model for Turn-to-Turn PDIV Prediction Dependent on Temperature 

  Elorza Azpiazu, Leire; Egea, Aritz; Almandoz, Gaizka; Ugalde, Gaizka; Sarasola, Izaskun (IEEE, 2024)

  Turn-to-turn insulation partial discharge inception voltage (PDIV) plays a crucial role in the design of the insulation system of inverter-fed motors for the automotive sector. This paper presents a turn-to-turn PDIV ...

• ABLA: an algorithm for repairing structure-based locators through attribute annotations 

  ALDALUR CEBERIO, IÑIGO; Larrinaga, Felix; Perez Riaño, Alain (Springer Nature, 2020)

  The growth of the web has been unstoppable in the last decade, which leads to an increasing demand for extracting information from it. Apart from the need to extract information, this growth also has brought the necessity ...

• Integration of Silicon Carbide devices to increase the AEP (Annual Energy Production) in a PM based wind generation system 

  Arrizabalaga, Antxon; Mazuela, Mikel; Idarreta Garate, Aitor; IRAOLA, UNAI; Aizpuru, Iosu (IEEE, 2020)

  A radical energetic change is needed nowadays and enhancing renewable energies should play a main role. For its superior performance and lower losses, SiC devices are identified as a potential technology to improve wind ...

• Towards a Probabilistic Fusion Approach for Robust Battery Prognostics 

  Alcibar, Jokin; Aizpurua Unanue, Jose Ignacio; Zugasti, Ekhi (PHM Society, 2024)

  Batteries are a key enabling technology for the decarbonization of transport and energy sectors. The safe and reliable operation of batteries is crucial for battery-powered systems. In this direction, the development of ...

• INKLUDIRE: Clasificación y validación de directrices para el Diseño Inclusivo de productos de consumo 

  Etxabe, Amaia; Beitia, Amaia; Gonzalez-de-Heredia, Arantxa; Justel Lozano, Daniel (AEIPRO, 2024)

  This article introduces the INKLUDIRE Inclusive Design guidelines, a compilation aimed at facilitating the design of accessible consumer products. Its primary objective is to provide designers with an easily applicable ...

• Habilitando honeypots embebidos de alta interacción mediante emulaciones de firmware 

  Gandiaga , Xabier; Zurutuza, Urko; Garitano, Iñaki (atlanTTic – Universidade de Vigo, 2023)

  Los sistemas embebidos aumentan en número y junto con esto también los ataques que los hacen objetivo. Para hacerles frente se ha desarrollado el análisis de firmware y creación de honeypots embebidos. El primero refuerza ...

• Towards a probabilistic error correction approach for improved drone battery health assessment 

  Alcibar, Jokin; Aizpurua Unanue, Jose Ignacio; Zugasti, Ekhi (Research Publishing, Singapore, 2023)

  Health monitoring of remote critical infrastructure, such as offshore wind turbines, is complex and expensive. For the offshore energy sector, the accessibility for on-site asset inspection is hampered due to their harsh ...

• Circular Power Electronics: Exploring the Scope and Suitability of Ecodesign Criteria for the Power Electronics Industry 

  Ruiz de Azua Lahidalga, Irati; Mendiburu Valor, Eider; Justel Lozano, Daniel; Fernandez Mendoza, Joan Manuel (Fraunhofer IZM, 2024)

  Renewable energies play a key role in achieving climate neutrality by 2050. However, although their environmental impact is generally lower compared to conventional energy sources, it is crucial to focus attention on the ...

• Towards Affordable RIS Devices: Electromagnetic Simulation and Implementation of Metasurfaces 

  Cifuentes Antxia, Jokin; Osa, Joseba; Barrutia, Iban; Mendicute, Mikel (IEEE, 2024)

  Reconfigurable Intelligent Surfaces can change their reflective response to adapt to changes in the communication channel, where such response is obtained by modifying the reflection coefficient of each of the unit cells ...

• Effects of Recycled Permanent Magnets on Electric Machine and Hybrid Electric Vehicle Performances 

  Ugalde, Gaizka; Garramiola, Fernando; Rivera, Christian A. (ASME, 2023)

  Permanent magnet price volatility is an ongoing issue that affects many industrial sectors worldwide, dictating the costs of the final product by a substantial degree. This fluctuation can be attributed to a large ...

• How local ecosystems can support energy communities: insights from Debagoiena Region 

  Rabanete, Lierni; Igartua, Juan Ignacio; Fernandez Mendoza, Joan Manuel; Ibarra, Dorleta (Mondragon Unibertsitatea, 2024)

  Energy communities are increasingly seen as a key lever for the energy transition. However, energy communities need supportive ecosystems to overcome the challenges they face individually. This study explores the development ...

• An Optimal Power-Splitting Strategy for Hybrid Storage Systems 

  CABEZUELO ROMERO, DAVID; Unamuno, Eneko (IEEE, 2024)

  The wide deployment of inverter-based resources is changing the grid characteristics and demanding rapid changes in the control and operation of power grids. Storage is becoming a key component of this transition, as it ...

• Responsabilidad y compromiso social: sentidos docentes en disputa 

  Alberdi-Ruiz de Alegría, Amaia (Universidad Complutense de Madrid, 2024)

  La comprensión de la responsabilidad y el compromiso social docente está en disputa. Narrativas vinculadas con la eficiencia, los aprendizajes y bienestares individuales se confrontan con las relacionadas en el cumplimiento ...

• Challenge-Based Learning in Higher Education: Master’s Degree in Logistics and Productive Operations Management from Mondragón University 

  Eguren, Jose Alberto; URIZAR AIZPURU, ENERITZ; Gorroño-Albizu, Leire; Soto-Gordoa, Myriam; Zenigaonaindia Muruamendiaraz, Nerea; Unzueta, Gorka; Garmendia, Alaine; Legarreta Alegria, Juan Luis (Editorial Universitat Politècnica de València, 2024)

  Since 2022, Mondragon University has implemented Challenge-Based Learning (CBL) in the teaching and learning process of the Master’s in Logistics and Productive Operations Management (MUDOLP) program. This article describes ...

• Tool surface texturing by shot peening: initial results and lessons learned 

  Sáenz de Argandoña, Eneko; Mendez Marti, Markel; Mendiguren, Joseba; Zabala, Alaitz (IOP Publishing, 2024)

  Abrasive and adhesive wear is a major issue in sheet metal forming processes. Although different solutions exist to reduce its impact, there is still room for progress. Surface texturing presents a big potential for ...

• Integración de Carburo de silicio para aumentar el AEP de sistemas de generación eólica basados en DFIG 

  Arrizabalaga, Antxon; Idarreta Garate, Aitor; Mazuela, Mikel; Aizpuru, Iosu; IRAOLA, UNAI (2020)

  Gracias a sus prestaciones superiores en comparación con los semiconductores de silicio actuales, los semiconductores de carburo de silicio suponen una tecnología con potencial para aumentar la producción energética anual ...

• Data-Driven Industrial Human-Machine Interface Temporal Adaptation for Process Optimization 

  Reguera-Bakhache, Daniel; Garitano, Iñaki; Uribeetxeberria, Roberto; Cernuda, Carlos; Zurutuza, Urko (IEEE, 2020)

  The application of Artificial Intelligence (AI) into Industrial Human-Machine Interfaces (HMIs) moved old systems with physical buttons and analogue actuators into adaptive interaction models and context-based self adjusted ...

• The Line Back Principle as a Means of Optimising Logistical Production Processes: A Case Study of a Household Appliance Manufacturer 

  Navarro Aramburu, Ivan; Unzueta, Gorka; Eguren, Jose Alberto (Springer, 2023)

  This paper shows the application of a process of analysis and optimisation of logistic-productive processes based on the Line Back Principle as applied to a household appliance manufacturing company. The implementation has ...

• Análisis de arquitecturas de potencia parcial para aplicaciones de corriente continua 

  Anzola, Jon; Aizpuru, Iosu; GARAYALDE, ERIK; Arrizabalaga, Antxon; Mazuela, Mikel (2019)

  En este documento se analizan arquitecturas avanzadas de convertidores DC-DC que buscan reducir la potencia a manejar por estos mismos. Para ello, en primer lugar, se describen las ventajas y desventajas que presentan este ...

• Dimensionamiento de Sistemas Fotovoltaicos con Almacenamiento Híbrido 

  GARAYALDE, ERIK; Anzola, Jon; Aizpuru, Iosu (2019)

  Los sistemas fotovoltaicos aislados de la red eléctrica están generalmente compuestos por una agrupación de paneles fotovoltaicos, un elemento de almacenamiento como baterías, un convertidor DC-DC que actúa como cargador ...

Gehiago