Izenburua
Finding correlations between tool life and fundamental dry cutting tests in finishing turning of steelBeste instituzio
RWTH Aachen UniversityBertsioa
Bertsio argitaratua
Eskubideak
© 2015 The AuthorsSarbidea
Sarbide irekiaArgitaratzailearen bertsioa
http://dx.doi.org/10.1016/j.proeng.2015.12.539Non argitaratua
Procedia Engineering Vol. 132. Pp. 615–623, 2015Argitaratzailea
ElsevierGako-hitzak
InfraredTemperature
Tool life machinability
Laburpena
Tool life is usually measured by end tool life tests, however, such experiments are costly and time consuming. Establishing correlation between these tests and shorter and cheaper tests is consequentl ... [+]
Tool life is usually measured by end tool life tests, however, such experiments are costly and time consuming. Establishing correlation between these tests and shorter and cheaper tests is consequently of great interest. Experimental results from dry orthogonal cutting tests are reported and a good correlation between temperature reached at the tool and tool life test is shown. [-]
Sponsorship
Gobierno VascoProjectu ID
GV/Convocatoria de ayudas a la Investigación básica y-o aplicada 2014-2015/PI_2014_1_116/CAPV/Estudio de la influencia de la microestructura de aceros y superaleaciones base níquel en la maquinabilidad e integridad superficial de componentes mecanizados/MICROMAQUINTEBildumak
Item honek honako baimen-fitxategi hauek dauzka asoziatuta: