Zerrendatu Artikuluak-Ingeniaritza honen arabera: ikerketa taldea "Procesos avanzados de conformación de materiales"
42-tik 1-20 emaitza erakusten
-
A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites
(Elsevier, 2023)The paper presents a systematic experimental study of the interlaminar delamination behaviour of a carbon composite subjected to Mode I, Mode II and Mixed-mode delamination at both quasi-static (QS) and high-rate (HR) ... -
Analysis of the mechanical and microstructural fluctuations of high-strength steels and their effect on bending angle
(MDPI, 2023)The quality and complexity demands of manufactured parts in sectors such as automotive and aeronautics lead to narrower process windows. This affects the repeatability and stability of the process, where material properties ... -
An automatic thermo-mechanical testing apparatus for metal forming applications
(Elsevier, 2023)Dynamic testing of materials is necessary to model high-speed forming processes (e.g. hammer forging, blanking, forming, etc.) and crash/impact behaviour of structures, amongst others. The most common machines to perform ... -
Comparative Study of the Metallurgical Quality of Primary and Secondary AlSi10MnMg Aluminium Alloys
(MDPI, 2021)The use of secondary aluminium is increasingly being promoted in the automotive industry for environmental reasons. The purpose of this study was to demonstrate that it is possible to obtain a recycled AlSi10MnMg(Fe) ... -
Comparison of the hardening behaviour of different steel families : from mild and stainless steel to advanced high strength steels
(Elsevier Ltd., 2015)Although steel has been used in vehicles from the automotive industry's inception, different steel gradesare continually being developed in order to satisfy new fuel economy requirements. For example,advanced high strength ... -
Design and characterization of a novel lightweight multicomponent alloy Al58Zn28Mg6Si8
(Elsevier, 2023)This paper presents a novel multicomponent alloy Al58Zn28Mg6Si8, with a density of 3.46 g/cm3, which incorporates concepts from high entropy alloys. The optimum alloy composition was determined using the CALPHAD approach ... -
Drawbead uplift force analytical model for deep drawing operations
(IOP Publishing Ltd., 2018)Drawbead uplift force calculation has been an open issue among the deep drawing tool maker and software developers in the last years. Starting from the original work of Stoughton (1988) many have been the models presented ... -
Effect of Boron Content and Cooling Rate on the Microstructure and Boride Formation of β-Solidifying γ-TiAl TNM Alloy
(MDPI AG, 2020)Boron is a unique and popular grain refiner element in cast titanium aluminide (TiAl) alloys, as it helps to improve mechanical properties if properly alloyed. However, the formation mechanism of different types of borides ... -
Effect of the crucible composition on the Inconel 718 vacuum induction melting process efficiency
(Elsevier, 2023)Nickel-based superalloys are widely employed to manufacture aero-engine turbines due to their high mechanical strength and resistance to corrosion and creep. Vacuum Induction Melting (VIM) is a suitable manufacturing ... -
Effects of Different Si Content and Thermal Stories on the Secondary Phase Formation, Hot Ductility, and Stress Rupture Properties of Alloy 718 Investment Castings
(Springer, 2023)Herein, the effects of microstructure on high-temperature properties (hot ductility and stress rupture life) were investigated in alloy 718 investment castings manufactured with different Si contents (0.051, 0.11, and 0.17 ... -
Elastic behaviour characterisation of TRIP 700 steel by means of loading-unloading tests
(Elsevier Ltd., 2015)The elastic behaviour of TRIP 700 steel under plastic deformation is analysed. The analysis is carried out by means of classical tensile test and loading–unloading cyclic tests. These tests have been performed using high ... -
Experimental and Numerical Simulation Investigation on Deep Drawing Process of Inconel 718 with and without Intermediate Annealing Thermal Treatments
(MDPI AG, 2020)The aeronautical industry is moving from high-capacity large-airplane construction to low-capacity small-airplane construction. With the change in the production volume, there is a need for more e cient manufacturing ... -
Friction Modelling for Tube Hydroforming Processes : A Numerical and Experimental Study with Different Viscosity Lubricants
(MDPI, 2022)The final quality of sheet and tube metal–formed components strongly depends on the tribology and friction conditions between the tools and the material to be formed. Furthermore, it has been recently demonstrated that ... -
Friction Stir Welding of AA2099-T83 and AA2060-T8E30 Aluminium Alloys with New Cr-Free Surface Treatments and Sealant Application
(MDPI, 2021)The feasibility for friction stir welding (FSW) surface-treated AA2099-T83 aluminium extrusions with AA2060-T8E30 aluminium sheets in the overlap configuration and using a sealant at the interface was investigated in this ... -
FTIR as a Powerful Tool for Measurements of Diffusion in Supercritical Carbon Dioxide Using Taylor Dispersion Method
(MDPI, 2022)A new experimental high-pressure setup for measuring diffusion coefficients in supercritical fluids, based on Taylor dispersion method, and using an FTIR detector to operate up to 25.0 MPa was designed and optimized. Tracer ... -
Hardening prediction of diverse materials using the Digital Image Correlation technique
(Elsevier, 2018)In recent years, due to the introduction of higher resistance materials in the automotive sector, sheet metal-forming tool-makers have been forced to deal with more challenging process designs. Therefore, the optimisation ... -
High-temperature tribological performance of functionally graded Stellite 6/WC metal matrix composite coatings manufactured by laser-directed energy deposition
(Springer, 2024)Wear-driven tool failure is one of the main hurdles in the industry. This issue can be addressed through surface coating with ceramic-reinforced metal matrix composites. However, the maximum ceramic content is limited by ... -
In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel
(Elsevier, 2022)Modeling the elastic behavior of dual-phase steels is complex due to the strain dependency of Young's modulus and high elastic nonlinearity. Since it is assumed that reasons for this are to be found in microstructural ... -
Influence of the pressure dependent coefficient of friction on deep drawing springback predictions
(Elsevier Ltd., 2016)The aim of this work is to show the influence of defining a pressure dependent friction coefficient onnumerical springback predictions of a DX54D mild steel, a HSLA380 and a DP780 high strength steel. Thepressure dependent ... -
Integration of Hot Isostatic Pressing and Heat Treatment for Advanced Modified gamma-TiAl TNM Alloys
(MDPI, 2022)The conventional processing route of TNM (Ti-Nb-Mo) alloys combines casting and Hot Isostatic Pressing (HIP) followed by forging and multiple heat treatments to establish optimum properties. This is a time-consuming and ...