Erregistro soila

Tool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM

dc.creatorSpitaels, L.
dc.creatorOlabarri, N.A.
dc.creatorBossu, J.
dc.creatorMartic, G.
dc.creatorJuste, E.
dc.creatorArrazola, P.-J.
dc.creatorRivière-Lorphèvre, É.
dc.creatorDucobu, F.
dc.date.accessioned2024-10-25T14:02:38Z
dc.date.available2024-10-25T14:02:38Z
dc.date.issued2024-01-01
dc.identifier.citationSpitaels, L., Olabarri, N. A., Bossu, J., Martic, G., Juste, E., Arrazola, P.-J., Rivière-Lorphèvre, É., & Ducobu, F. (2024). Tool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM. Procedia CIRP, 121, 97-102. https://doi.org/10.1016/J.PROCIR.2023.09.235
dc.identifier.urihttps://hdl.handle.net/20.500.11984/6734
dc.description.abstractThe wear of milling tools used for finishing green ceramics shaped by pellet additive manufacturing can be challenging. This article aims to evaluate the tool life of a tool, initially dedicated to thermoplastics, when used for milling green zirconia and seeks to confirm the influence of the build direction on the cutting forces. The tool can withstand 30 minutes of milling without reaching the tool life criteria of ISO 8688. The generated surfaces exhibited a shiny finish, no material pull out and a Ra < 1.6 µm. The cutting forces were low with maximal values of 15 N.
dc.language.isoeng
dc.publisherElsevier B.V.
dc.rightsopenAccess
dc.subjectgreen ceramics
dc.subjecthybrid manufacturing
dc.subjectmilling
dc.subjectpellet additive manufacturing
dc.subjectwear monitoring
dc.titleTool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM
dc.typeCONFERENCE_PAPER
dc.date.updated2024-10-25T14:02:38Z


Item honetako fitxategiak

FitxategiakTamainaFormatuaIkusi

Item honek ez dauka asoziatutako fitxategirik.

Item hau honako bilduma honetan/hauetan agertzen da

Erregistro soila