Thumbnail
Registro completo
Impacto
Google Scholar
Compartir
EmailLinkedinFacebookTwitter
Guarda la referencia
Mendely

Zotero

untranslated

Mets

Mods

Rdf

Marc

Exportar a BibTeX
Título
Tool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM
Fecha de publicación
Editor
Elsevier B.V.
Palabras clave
green ceramics
hybrid manufacturing
milling
pellet additive manufacturing ... [+]
green ceramics
hybrid manufacturing
milling
pellet additive manufacturing
wear monitoring [-]
Resumen
The wear of milling tools used for finishing green ceramics shaped by pellet additive manufacturing can be challenging. This article aims to evaluate the tool life of a tool, initially dedicated to th ... [+]
The wear of milling tools used for finishing green ceramics shaped by pellet additive manufacturing can be challenging. This article aims to evaluate the tool life of a tool, initially dedicated to thermoplastics, when used for milling green zirconia and seeks to confirm the influence of the build direction on the cutting forces. The tool can withstand 30 minutes of milling without reaching the tool life criteria of ISO 8688. The generated surfaces exhibited a shiny finish, no material pull out and a Ra < 1.6 µm. The cutting forces were low with maximal values of 15 N. [-]
URI
https://hdl.handle.net/20.500.11984/6734
Tipo de documento
CONFERENCE_PAPER
Derechos
openAccess
Resumen
The wear of milling tools used for finishing green ceramics shaped by pellet additive manufacturing can be challenging. This article aims to evaluate the tool life of a tool, initially dedicated to thermoplastics, when used for milling green zirconia and seeks to confirm the influence of the build direction on the cutting forces. The tool can withstand 30 minutes of milling without reaching the tool life criteria of ISO 8688. The generated surfaces exhibited a shiny finish, no material pull out and a Ra < 1.6 µm. The cutting forces were low with maximal values of 15 N.
Colecciones