Erregistro soila

Effect of the fiber-matrix separation on the mechanical properties of a fiberglass reinforced polyamide forged beam

dc.rights.licenseAttribution-ShareAlike 4.0 International*
dc.contributor.authorBaskaran, Maider
dc.contributor.authorMorales, Unai
dc.contributor.authorEsnaola, Aritz
dc.contributor.authorAretxabaleta, Laurentzi
dc.contributor.authorAurrekoetxea, Jon
dc.contributor.authorOlaziregi Cuevas, Udane
dc.date.accessioned2023-03-20T08:07:50Z
dc.date.available2023-03-20T08:07:50Z
dc.date.issued2022
dc.identifier.issn2531-0739en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=171727en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/6044
dc.description.abstractIn the present work, ribbed beams have been manufactured by forging fiberglassreinforced polyamide using two different temperatures. The higher processing temperature studied (300 ºC) ensures the filling of the mold in the forging/GMT process, but also increases the fiber-matrix separation phenomenon, limiting the length of the rib with fiber (11%). This heterogeneity in the fiber content translates into a loss of stiffness and strength in the area of the rib with respect to the area of the base, of 70 and 60% respectively, for the most severe case (300 ºC). The second contribution of the work has been the demonstration of additive manufacturing, more specifically pellet extrusion, as a rapid prototyping technology in structural studies, since the stiffness of the 3D printing component was in intermediate values of the two forged prototypes, but its strength and elongation at break have been even higher.en
dc.description.abstractEn el presente trabajo se han fabricado vigas nervadas mediante forja de poliamida reforzada con fibra de vidrio utilizando dos temperaturas diferentes, 270 ºC y 300 ºC. La mayor temperatura de procesado estudiada (300 ºC) asegura el llenado del molde en el proceso forja/GMT, pero también aumenta el fenómeno de la separación fibra-matriz, limitándose la longitud del nervio en el que se encuentra fibra al 11%. Esta heterogeneidad en el contenido de fibra se traduce en una pérdida de rigidez y resistencia en la zona del nervio con respecto a la zona de la base, del 70 y 60% respectivamente para el caso más severo (300 ºC). La segunda contribución del trabajo ha sido la demostración de la fabricación aditiva, más concretamente de extrusión de granza, como tecnología de prototipado rápido en estudios estructurales, ya que la rigidez del componente de impresión 3D estaba en valores intermedios de los dos prototipos forjados, pero su resistencia y alargamiento a la rotura han sido incluso mayores.es
dc.description.sponsorshipComisión Europeaes
dc.language.isospaen
dc.publisherScipediaen
dc.rights© 2022 The Authorsen
dc.rights.urihttp://creativecommons.org/licenses/by-sa/4.0/*
dc.subjectForjaes
dc.subjectSeparación fibra-matrizes
dc.subjectViga nervadaes
dc.subjectFlexiónes
dc.subjectFiber-matrix separationen
dc.subjectForgeen
dc.subjectRibbed beamen
dc.subjectBendingen
dc.subjectODS 9 Industria, innovación e infraestructuraes
dc.titleEfecto de la separación fibra-matriz sobre las propiedades mecánicas de una viga forjada en poliamida reforzada con fibra de vidrioes
dc.titleEffect of the fiber-matrix separation on the mechanical properties of a fiberglass reinforced polyamide forged beamen
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceRevista de Materiales Compuestosen
local.contributor.groupTecnología de plásticos y compuestoses
local.description.peerreviewedtrueen
local.identifier.doihttps://doi.org/10.23967/r.matcomp.2022.07.046en
local.relation.projectIDinfo:eu-repo/grantAgreement/EC/H2020/768710/EU/Efficient Material Hybridization by Unconventional Layup and Forming of Metals and Composites for Fabrication of Multifunctional Structures/LAY2FORMen
local.source.detailsVol. 07. N. 1 - Comunicaciones Matcomp21 (2022) - Sostenibilidad y reciclaje - Fabricaciónen
oaire.format.mimetypeapplication/pdfen
oaire.file$DSPACE\assetstoreen
oaire.resourceTypehttp://purl.org/coar/resource_type/c_c94fen
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85en


Item honetako fitxategiak

Thumbnail
Thumbnail

Item hau honako bilduma honetan/hauetan agertzen da

Erregistro soila

Attribution-ShareAlike 4.0 International
Bestelakorik adierazi ezean, itemaren baimena horrela deskribatzen da: Attribution-ShareAlike 4.0 International