Registro sencillo

dc.contributor.authorSaez de Buruaga, Mikel
dc.contributor.authorSoler Mallol, Daniel
dc.contributor.authorARRAZOLA, PEDRO JOSE
dc.contributor.otherMedina Clavijo, Bentejui
dc.contributor.otherMotz, Christian
dc.contributor.otherChuvilin, Andrey
dc.date.accessioned2022-10-25T17:07:14Z
dc.date.available2022-10-25T17:07:14Z
dc.date.issued2018
dc.identifier.issn0924-0136en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=147800en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/5761
dc.description.abstractIn depth understanding of tool-chip friction behavior is a significant aspect for tool wear performance in steels. In the present work attention has been paid to the strain mode of the chip section in contact with the rake surface of the tool, and its influence on the mechanics of material removal. There is a multitude of evidence for the existence of qualitatively different cutting regimes in orthogonal machining of annealed AISI-1045 steel with uncoated P15 carbide cutting tools in dry conditions at cutting speeds between 5 and 200 m/min. The evaluation of chip morphology and microstructure, and cutting and feed forces, revealed an abrupt step-like transition at a cutting speed in the range of 50–60 m/min, which was attributed to the transition from built-up edge (BUE) mode developed at low cutting speed, to the mode at which the chip slides directly over the tool surface. These qualitatively distinct mechanisms of tool-chip interaction are determined by two different microstructural effects: work hardening by severe plastic deformation and microstructural softening by dynamic recrystallization (DRX). It is argued that the onset of DRX is the reason for further instability of BUE and thus is the main cause of change of the cutting regime.es
dc.description.sponsorshipGobierno Vasco-Eusko Jaurlaritzaes
dc.language.isoengen
dc.publisherElsevieren
dc.rights© 2018 Elsevieren
dc.subjectMachiningen
dc.subjectCuttingen
dc.subjectMicrostructureen
dc.subjectDynamic recrystallizationen
dc.subjectBuilt-up edgeen
dc.subjectAISI 1045en
dc.titleMicrostructural aspects of the transition between two regimes in orthogonal cutting of AISI 1045 steelen
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceJournal of Materials Processing Technologyen
local.contributor.groupMecanizado de alto rendimientoes
local.description.peerreviewedtrueen
local.description.publicationfirstpage87en
local.description.publicationlastpage96en
local.identifier.doihttps://doi.org/10.1016/j.jmatprotec.2018.05.016en
local.relation.projectIDinfo:eu-repo/grantAgreement/GV/Convocatoria de ayudas a la Investigación básica y-o aplicada 2014-2015/PI_2014_1_116/CAPV/Estudio de la influencia de la microestructura de aceros y superaleaciones base níquel en la maquinabilidad e integridad superficial de componentes mecanizados/MICROMAQUINTEen
local.relation.projectIDinfo:eu-repo/grantAgreement/GE/Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Convocatoria 2015, Modalidad 1: Proyectos de I+D+I/DPI2015-67667-C3-3-R/ES/Modelización y análisis experimental del proceso de mecanizado en la escala micro/EMULATEen
local.contributor.otherinstitutionhttps://ror.org/023ke8y90eu
local.contributor.otherinstitutionhttps://ror.org/01jdpyv68en
local.contributor.otherinstitutionhttps://ror.org/01cc3fy72eu
local.source.detailsVol. 260. Pp. 87–96. October, 2018en
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_6501en
oaire.versionhttp://purl.org/coar/version/c_ab4af688f83e57aaen


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(es)

Registro sencillo