Registro sencillo

dc.contributor.authorBarrutia-Sarasua, Haritz
dc.contributor.authorEsnaola, Jon Ander
dc.contributor.authorTutar, Mustafa
dc.contributor.otherCosta Pereira, Sol Carolina
dc.date.accessioned2022-09-15T06:16:23Z
dc.date.available2022-09-15T06:16:23Z
dc.date.issued2013
dc.identifier.issn0196-8904en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=93472en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/5672
dc.description.abstractFriction pressure drop correlation equations are derived from a numerical study by characterizing the pressure drop phenomena through porous medium of both types namely stacked and wound woven wire matrices of a Stirling engine regenerator over a specified range of Reynolds number, diameter and porosity. First, a finite volume method (FVM) based numerical approach is used and validated against well known experimentally obtained empirical correlations for a misaligned stacked woven wire matrix, the most widely used due to fabrication issues, for Reynolds number up to 400. The friction pressure drop correlation equation derived from the numerical results corresponds well with the experimentally obtained correlations with less than 5% deviation. Once the numerical approach is validated, the study is further extended to characterize the pressure drop phenomena in a wound woven wire matrix model of a Stirling engine regenerator for a diameter range from 0.080 to 0.110 mm and a porosity range from 0.472 to 0.638 within the same Reynolds number range. Thus, the new correlation equations are derived from this numerical study for different flow configurations of the Stirling engine regenerator. The results indicate flow nature and complex geometry dependent friction pressure drop characteristics within the present Stirling engine regenerator system. It is believed that the developed correlations can be applied with confidence as a cost effective solution to characterize and hence to optimize stacked and woven Stirling engine efficiency in the above specified ranges.en
dc.language.isoengen
dc.publisherElsevieren
dc.rights© 2012 Elsevieren
dc.subjectStirling engineen
dc.subjectFriction factoren
dc.subjectPorosityen
dc.subjectCFDen
dc.subjectLaminar flowen
dc.subjectTurbulence flowen
dc.titleNumerical study of the pressure drop phenomena in wound woven wire matrix of a Stirling regeneratoren
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceEnergy Conversion and Managementen
local.contributor.groupMecánica de fluidoses
local.contributor.groupDiseño y mecánica estructurales
local.description.peerreviewedtrueen
local.description.publicationfirstpage57en
local.description.publicationlastpage65en
local.identifier.doihttps://doi.org/10.1016/j.enconman.2012.10.014en
local.contributor.otherinstitutionhttps://ror.org/01cc3fy72es
local.contributor.otherinstitutionCentro Stirling S. Coop.es
local.source.detailsVol. 67. Pp. 57–65. March, 2013en
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_6501en
oaire.versionhttp://purl.org/coar/version/c_ab4af688f83e57aaen


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(es)

Registro sencillo