Erregistro soila

dc.rights.licenseAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.contributor.authorGALDOS, Lander
dc.contributor.authorMendiguren, Joseba
dc.contributor.authorSáenz de Argandoña, Eneko
dc.contributor.authorAgirre, Julen
dc.contributor.otherSethy, Ritanjali
dc.date.accessioned2022-04-29T12:39:18Z
dc.date.available2022-04-29T12:39:18Z
dc.date.issued2017
dc.identifier.issn1877-7058en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=145971en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/5555
dc.description.abstractHot forging processes are highly influenced by the contact conditions between the billet and the dies. A wrong definition of the contact conditions may lead to wrong predictions of the final component geometry, the quantity of material necessary to fill in the cavity, the wear of the tools and the force necessary to manufacture the component. Furthermore, when dealing with titanium alloys, the alpha case formation due to oxidation is critical. For that reason, ceramic coatings are used to prevent billet oxidation during the heating stage and to improve the material flow lowering the friction coefficient between the billet material and tooling. In the present study, Ring Compression tests and T-Shape tests are carried out using ceramic-coated samples and friction behavior of Ti64 in contact with heated tool steel is studied. The final aim of the study has been to analyze the same tribo-system but having different contact pressures, sliding velocities and surface enlargement factors, which could affect the coating behavior. As a result, the friction coefficients are calculated for the above-mentioned tribo-tests by the comparison of the experimental data and numerical simulation results.en
dc.language.isoengen
dc.publisherElsevieren
dc.rights© 2017 The Authorsen
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectRing compression tesen
dc.subjectT-Shape testen
dc.subjectTitaniumen
dc.titleCharacterization of Ti64 forging friction factor using ceramic coatings and different contact conditionsen
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceProcedia Engineeringen
local.contributor.groupProcesos avanzados de conformación de materialeses
local.description.peerreviewedtrueen
local.description.publicationfirstpage2239en
local.description.publicationlastpage2244en
local.identifier.doihttp://dx.doi.org/10.1016/j.proeng.2017.10.988en
local.source.detailsVol. 207. Pp. 2239-2244. Noviembre, 2017en
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_c94fen
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85en


Item honetako fitxategiak

Thumbnail
Thumbnail

Item hau honako bilduma honetan/hauetan agertzen da

Erregistro soila

Attribution-NonCommercial-NoDerivatives 4.0 International
Bestelakorik adierazi ezean, itemaren baimena horrela deskribatzen da: Attribution-NonCommercial-NoDerivatives 4.0 International