Simple record

dc.contributor.authorEguren-Alustiza, Imanol
dc.contributor.authorAlmandoz, Gaizka
dc.contributor.authorEgea, Aritz
dc.contributor.authorZárate Barriga, Sergio
dc.contributor.otherUrdangarin Lasa, Ander
dc.date.accessioned2022-04-26T10:41:24Z
dc.date.available2022-04-26T10:41:24Z
dc.date.issued2022
dc.identifier.issn0885-8969en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=167654en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/5531
dc.description.abstractLinear switched-flux machines are a kind of permanent magnet machine with a passive ferromagnetic secondary. Therefore, they can achieve both a good performance and a low cost in long stroke applications. However, due to the end effect, these machines generate high detent force and on load thrust force ripples. There are several solutions in the literature that aim to minimise the thrust ripple. One of those solutions is the placement of additional poles in the ends of the machine. These can be passive, i. e. simple ferromagnetic teeth, or active, with additional magnets. The former is the most common solution in the literature. In this article, the optimal configuration of the additional poles is discussed via 4 additional pole sizing strategies, and the influence of the design variables and optimisation objectives is analysed. Then, a generic additional pole configuration is proposed, which combines a high effectiveness and a simple design. Finally, an experimental validation is carried out, and the measurements confirm the results from the optimisation.en
dc.description.sponsorshipGobierno Vascoes
dc.language.isoengen
dc.publisherIEEEen
dc.rights© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.en
dc.subjectEnd effecten
dc.subjectLinear machinesen
dc.subjectOptimisationen
dc.subjectRippleen
dc.subjectSwitched-Fluxen
dc.subjectmagneten
dc.titleThrust Ripple Reduction in Linear Switched-Flux Machines via Additional Pole Optimisationen
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceIEEE Transactions on Energy Conversionen
local.contributor.groupAccionamientos aplicados a la tracción y a la generación de energía eléctricaes
local.description.peerreviewedtrueen
local.identifier.doihttps://doi.org/10.1109/TEC.2022.3160505en
local.relation.projectIDinfo:eu-repo/grantAgreement/GV/Programa predoctoral de formación del personal investigador no doctor 2021-2022/PRE_2021_2_0240/CAPV//en
local.contributor.otherinstitutionOrona EICes
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_6501en
oaire.versionhttp://purl.org/coar/version/c_ab4af688f83e57aaen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Simple record