Buscar
Mostrando ítems 1-10 de 11
Numerical simulation of U-Drawing test of Fortiform 1050 steel using different material models
(Elsevier Ltd., 2017)
Steel has been used in vehicles from the automotive industry's inception. Different steel grades are continually being developed
in order to satisfy new fuel economy requirements. For example, advanced high ...
Press hardening of alternative materials: conventional high- strength steels
(Springer Nature, 2017)
he increase in strength of new high strength steels(HHS) and advanced high strength steels (AHHS) has led toforming issues, such as high springback, low formability, increase of forming forces and tool wear. These problems ...
Study on the influence of the springback on the hole expansion ratio characterization
(Whioce Publishing, 2018)
Material formability has become one of the main problems, together with the springback, when stamping high
added-value components for the automotive industry. The pursuit of weight reduction has led to higher strength ...
Numerical simulation of the roll levelling of third generation fortiform 1050 steel using a nonlinear combined hardening material model
(IOP Publishing Ltd, 2017)
Elasto–plastic behavior of the third generation Fortiform 1050 steel has been analysed using cyclic tension–compression tests. At the same time, the pseudo elastic modulus evolution with plastic strain was analysed using ...
U-drawing of Fortiform 1050 third generation steels. Numerical and experimental results
(IOP Publishing Ltd, 2017)
Elasto–plastic behavior of the third generation Fortiform 1050 steel has been analysed using cyclic tension–compression tests. At the same time, the pseudo elastic modulus evolution with plastic strain was analysed using ...
On the accurate characterization of the drawbead up-lift forces
(IOP Publishing Ltd., 2018)
The competitiveness of the automotive sector has led to a high demand of accuracy and reduction in lead-time of the deep drawing tool making process. In that regard, the numerical simulation of the deep drawing process has ...
Drawbead uplift force analytical model for deep drawing operations
(IOP Publishing Ltd., 2018)
Drawbead uplift force calculation has been an open issue among the deep drawing tool maker and software developers in the last years. Starting from the original work of Stoughton (1988) many have been the models presented ...
Comparison of the hardening behaviour of different steel families : from mild and stainless steel to advanced high strength steels
(Elsevier Ltd., 2015)
Although steel has been used in vehicles from the automotive industry's inception, different steel gradesare continually being developed in order to satisfy new fuel economy requirements. For example,advanced high strength ...
Influence of the pressure dependent coefficient of friction on deep drawing springback predictions
(Elsevier Ltd., 2016)
The aim of this work is to show the influence of defining a pressure dependent friction coefficient onnumerical springback predictions of a DX54D mild steel, a HSLA380 and a DP780 high strength steel. Thepressure dependent ...
Elastic behaviour characterisation of TRIP 700 steel by means of loading-unloading tests
(Elsevier Ltd., 2015)
The elastic behaviour of TRIP 700 steel under plastic deformation is analysed. The analysis is carried out by means of classical tensile test and loading–unloading cyclic tests. These tests have been performed using high ...