Listar Ikerketa-Artikuluak por autor "757d5d8e6392c00ab6930d035cd507b9"
Mostrando ítems 1-5 de 5
-
Hole quality improvement in CFRP/Ti6Al4V stacks using optimised flow rates for LCO2 and MQL sustainable cooling/lubrication
rodriguez, Iñigo; ARRAZOLA, PEDRO JOSE; CUESTA ZABALAJAUREGUI, MIKEL (Elsevier, 2024)Carbon fibre reinforced polymer/titanium stacks (CFRP/Ti6Al4V) are employed in aeronautics due to their excellent weight-to-strength ratio and corrosion properties. However, these same material properties present challenges ... -
The impact of airborne emissions from coolants and lubricants on machining costs
rodriguez, Iñigo; ARRAZOLA, PEDRO JOSE (Elsevier, 2024)A novel aerosol evaluation cell was employed to measure particle number and mass concentration, with a size distribution from nano to micro scale. Different cooling/lubrication and airflow extraction scenarios were tested ... -
Improving surface integrity when drilling CFRPs and Ti-6Al-4V using sustainable lubricated liquid carbon dioxide
rodriguez, Iñigo; ARRAZOLA, PEDRO JOSE; CUESTA ZABALAJAUREGUI, MIKEL (Elsevier, 2022)In the quest for decreasing fuel consumption and resulting gas emissions in the aeronautic sector, lightweight materials such as Carbon Fiber Reinforced Polymers (CFRPs) and Ti-6Al-4V alloys are being used. These materials, ... -
A novel indirect cryogenic cooling system for improving surface finish and reducing cutting forces when turning ASTM F-1537 cobalt-chromium alloys
rodriguez, Iñigo; ARRAZOLA, PEDRO JOSE (Springer, 2020)This paper presents a novel indirect cryogenic cooling system, employing liquid nitrogen (LN2) as a coolant for machining the difficult-to-cut ASTM F-1537 cobalt-chromium (CoCr) alloy. The prototype differs from the already ... -
Tool Geometry Optimisation for LCO2 Assisted Milling of Ti6Al4V
rodriguez, Iñigo; Soriano Moreno, Denis; CUESTA ZABALAJAUREGUI, MIKEL; ARRAZOLA, PEDRO JOSE (Elsevier, 2024)Titanium alloy Ti6Al4V is of great importance to the aeronautical and medical sectors due to its mechanical properties such as a high strength-to-weight ratio and corrosion resistance. On the downside, machining Ti6Al4V ...