Bilatu
69-tik 41-50 emaitza erakusten
Quasi-static and fatigue delamination characterisation for carbon fibre reinforced woven laminates: investigation into the nesting effect between layers
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2016)
Low weight is one of the most important design criteria to be considered during the selection of the material for different applications. Weight saving is necessary in the applications where the components are in motion. ...
Wireless Channel Model and LDM-Based Transmission with Unequal Error Protection for Inside Train Communications
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2017)
Although the deployment of wireless systems is widespread, there are still sectors where they are not used due to their lack of reliability in comparison to wired systems. Sectors like industry or vehicle communications ...
Spectrum handoff strategy for cognitive radio-based Mac in industrial wirless sensor and actuator networks
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2016)
In this thesis, a Cognitive Radio(CR)-based MAC for Industrial Wireless Sensor and Actuator Network (IWSAN) applications is proposed. IWSANs are typically used for closed-loop control applications, and they demand strict ...
Mechanical behaviour of fibre metal laminates based on self-reinforced composites for impact applications
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2016)
Lightness and appropriate mechanical response of materials are currently demanded in many applications related to transportation (automotive, aeronautic). Depending on the component, an appropriate mechanical behaviour may ...
Nuevo modelo para evaluar el nivel de aceptación de las tecnologías desde la perspectiva de la interacción y percepción de usuario
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2020)
New trends in Industry 4.0 are focused on the importance of human-machine collaboration, promoting closer cooperation between both and encouraging the efficient use of machines and people in a cooperative environment ...
Investigación en el método de gestión de entornos multiproyecto "Cadena crítica"
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2009)
The aim of this thesis is to look deeply into the mechanisms related to Critical Chain Project Management and its implementation in companies that perform in multiproject environments. Even if problems related to this kind ...
Desarrollo y despliegue de un modelo de madurez de mejora continua adaptado a una pyme industrial de bienes de equipo del País Vasco
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2020)
The objective of this thesis is to develop, implement and validate a continuous improvement model (CIM) adapted to industrial small and medium enterprises (SMEs) to generate a sustainable continuous improvement (CI) ...
Pouch cell fabrication process optimisation through physico-chemical modelling and characterisation
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2020)
The world is facing an energy revolution, seeking more sustainable based energy solutions while the global energy demand is increasing. New trends in energy consumption and new applications have arisen in which energy ...
Design and validation of a methodology to implement data-driven predictive maintenance in industrial environments
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2021)
New trends in manufacturing and industry lead to digitalise all processes, machines and communicate them forming Cyber Physical Systems (CPS), facilitating process monitoring and data acquisition. The analysis of that ...
Milling of Gamma titanium aluminides
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2022)
Gamma Titanium Aluminide (gamma – TiAl) alloys are intermetallics with approximately half the density of nickel based superalloys. Their low density, high specific strength, and good structural integrity at high temperatures ...