Simple record

dc.rights.licenseAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.contributor.authorARRAZOLA, PEDRO JOSE
dc.contributor.otherDucobu, F.
dc.contributor.otherRivière-Lorphèvre, E.
dc.contributor.otherFilippi, E.
dc.date.accessioned2020-07-06T10:41:40Z
dc.date.available2020-07-06T10:41:40Z
dc.date.issued2015
dc.identifier.issn2212-8271en
dc.identifier.urihttp://hdl.handle.net/20.500.11984/1776
dc.description.abstractTi6Al4 V is a titanium alloy widely used in the aeronautical industry and machining is often adopted to manufacture it. These parts must satisfy requirements specified by the customer. A crucial characteristic of aircraft machined parts is their reliability and, therefore, their fatigue life has to be mastered. In this context, the corresponding requirement concerns the surface integrity. This should be achieved by selecting adequate cutting parameters, which is actually not an immediate operation. The geometry of the tool will afterwards change during its life, what is more as Ti6Al4 V is known to be a hard-to-machine material. In this context, a finite element model is developed to highlight the influence of tool wear on fundamental variables like forces, temperatures, stresses,... and surface integrity (through plastic strains). The results should help to decide when it is time to replace the tool before altering the part and therefore not meet the specifications anymore.en
dc.language.isoengen
dc.publisherElsevieren
dc.rights© 2015 The Authorsen
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectSurface integrityen
dc.subjectTitaniumFinite element methoden
dc.subjectFEMen
dc.titleFinite Element Prediction of the Tool Wear Influence in Ti6Al4V Machiningen
dc.typeinfo:eu-repo/semantics/conferenceObjecten
dcterms.accessRightsinfo:eu-repo/semantics/openAccessen
dcterms.sourceProcedia CIRPen
dc.description.versioninfo:eu-repo/semantics/publishedVersionen
local.contributor.groupMecanizado de alto rendimientoes
local.description.peerreviewedtrueen
local.description.publicationfirstpage124en
local.description.publicationlastpage129en
local.identifier.doihttp://dx.doi.org/10.1016/j.procir.2015.03.056en
local.contributor.otherinstitutionUniversity of Monses
local.source.detailsVol. 31. Pp. 124–129. Available online 3 June, 2015eu_ES


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Simple record

Attribution-NonCommercial-NoDerivatives 4.0 International
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 International