Buscar
Mostrando ítems 1-10 de 27
Innovative Method dedicated to the development of a ferrite-pearlite grade regarding its MAChinability (IMMAC): final report
(Oficina de Publicaciones de la Unión Europea, 2019)
Ferrite-pearlite (FP) steels are the most common material for engineering and automotive industries (gear box parts, crankshaft, connecting rods, injection parts…). Without any extensive research, considering the different ...
Finding correlations between tool life and fundamental dry cutting tests in finishing turning of steel
(Elsevier, 2015)
Tool life is usually measured by end tool life tests, however, such experiments are costly and time consuming. Establishing correlation between these tests and shorter and cheaper tests is consequently of great interest. ...
Microstructure based flow stress model to predict machinability in ferrite–pearlite steels
(Elsevier Ltd., 2019)
A new flow stress model is proposed to describe the behaviour of ferrite–pearlite steels based on microstructure properties, including the effect of high strains, strain rates and temperatures. The model introduces strain ...
FEM modeling of hard turning 42CrMoS4 steel
(Elsevier B.V., 2019)
Effect of heat Treatment Conditions on the Machinability of Ti64 and Ti54 M Alloys
(Elsevier, 2012)
Orthogonal tests on cylindrical workpieces were carried out to analyze the effect of heat treatment on the machinability of newly developed Ti54M titanium alloy in comparison with Ti64. This paper focuses on the comparison ...
Determination of emissivity and temperature of tool rake face when cutting AISI 4140
(Elsevier B.V., 2019)
A method for measuring tool temperature in the tool/chip contact zone of the rake face of a tool during dry orthogonal cutting using thermography is presented. This method used a new calibration method that combined with ...
New Calibration method to measure Rake Face Temperature of the tool during Dry Orthogonal Cutting using Thermography
(Elsevier Ltd., 2018)
A new method for measuring temperature in the rake face of a tool during dry orthogonal cutting using ther-
mography is presented. In addition, a new technique is also used to calibrate the infrared camera. Using ...
A Coupled Eulerian Lagrangian Model to Predict Fundamental Process Variables and Wear Rate on Ferrite-pearlite Steels
(Elsevier B.V., 2017)
A coupled Eulerian-Lagrangian Finite Element model of the orthogonal cutting process was developed to predict the influence that ferritepearlite steel variants have on fundamental process variables and tool wear. As a case ...
Mechanical and electrical properties of additively manufactured copper
(IOP Publishing, 2021)
Additive Manufacturing (AM) has become the new paradigm of design and production strategies. While structural and functional materials are the most implemented ones, it is also possible to manufacture parts using precious ...
Experimental investigation of contact forces and temperatures in rubbing interactions of honeycomb interstate seals
(IOP Publishing, 2021)
The new architecture of high velocity aircraft engines includes labyrinth-honeycomb interstate seals to improve the engine’s stability. To increase these engines capacity a commonly used strategy is to reduce the clearance ...