Bilatu
5-tik 1-5 emaitza erakusten
A novel indirect cryogenic cooling system for improving surface finish and reducing cutting forces when turning ASTM F-1537 cobalt-chromium alloys
(Springer, 2020)
This paper presents a novel indirect cryogenic cooling system, employing liquid nitrogen (LN2) as a coolant for machining the difficult-to-cut ASTM F-1537 cobalt-chromium (CoCr) alloy. The prototype differs from the already ...
Improving surface integrity when drilling CFRPs and Ti-6Al-4V using sustainable lubricated liquid carbon dioxide
(Elsevier, 2022)
In the quest for decreasing fuel consumption and resulting gas emissions in the aeronautic sector, lightweight materials such as Carbon Fiber Reinforced Polymers (CFRPs) and Ti-6Al-4V alloys are being used. These materials, ...
Hole quality improvement in CFRP/Ti6Al4V stacks using optimised flow rates for LCO2 and MQL sustainable cooling/lubrication
(Elsevier, 2024)
Carbon fibre reinforced polymer/titanium stacks (CFRP/Ti6Al4V) are employed in aeronautics due to their excellent weight-to-strength ratio and corrosion properties. However, these same material properties present challenges ...
Tool Geometry Optimisation for LCO2 Assisted Milling of Ti6Al4V
(Elsevier, 2024)
Titanium alloy Ti6Al4V is of great importance to the aeronautical and medical sectors due to its mechanical properties such as a high strength-to-weight ratio and corrosion resistance. On the downside, machining Ti6Al4V ...
The impact of airborne emissions from coolants and lubricants on machining costs
(Elsevier, 2024)
A novel aerosol evaluation cell was employed to measure particle number and mass concentration, with a size distribution from nano to micro scale. Different cooling/lubrication and airflow extraction scenarios were tested ...