Zerrendatu honen arabera: egilea "93e00a0122a9fd82f7823e9833fbe927"
-
50 kW Partial Power Converter for EV Charging
Anzola, Jon; Arruti Romero, Asier; Aizpuru, Iosu; Agirrezabala, Eneko; Mazuela, Mikel (IEEE, 2024)This paper presents the design and assembly of a 50 kW dual active bridge partial power converter. Due to the reduction in the power processed by the converter, the maximum power observed by the converter is set to 4.7 kW. ... -
Analysis and Implementation of different non-isolated Partial-Power Processing Architectures based on the Cuk Converter
Anzola, Jon (IEEE, 2022)This paper presents the analysis and study of different partial-power processing architectures based on the Cuk converter. Thus, the non-isolated topologies analyzed have been considered operative as voltage source converter ... -
Analytical, FEM and Experimental Study of the Influence of the Airgap Size in Different Types of Ferrite Cores
Arruti Romero, Asier; Anzola, Jon; Aizpuru, Iosu; Mazuela, Mikel (IEEE, 2022)This work reviews and compares different airgap reluctance calculation approaches with experimental results, focusing on the Schwarz-Christoffel transformation. The modelling of the airgap reluctance in two dimensions is ... -
Análisis de arquitecturas de potencia parcial para aplicaciones de corriente continua
Anzola, Jon; Aizpuru, Iosu; GARAYALDE, ERIK; Arrizabalaga, Antxon; Mazuela, Mikel (2019)En este documento se analizan arquitecturas avanzadas de convertidores DC-DC que buscan reducir la potencia a manejar por estos mismos. Para ello, en primer lugar, se describen las ventajas y desventajas que presentan este ... -
Bidirectional Cuk Converter in Partial-Power Architecture with Current Mode Control for Battery Energy Storage System in Electric Vehicles
Anzola, Jon; Aizpuru, Iosu (IEEE, 2022)This paper presents a partial-power processing architecture intended for an on-board charger. This module is integrated into a Battery Energy Storage System (BESS). This model allows us to easily control the charge-discharge ... -
The composite improved generalized steinmetz equation (ciGSE): an accurate model combining the composite waveform hypothesis with classical approaches
Arruti Romero, Asier; Anzola, Jon; Aizpuru, Iosu; Mazuela, Mikel (IEEE, 2024)Predicting core losses is a difficult task for designing magnetic components. Under triangular current waveforms the classical approaches work with duty cycles close to 0.5 but are inaccurate for high and low duty cycles. ... -
Convertidor de Potencia Parcial Elevador-Reductor para Aplicaciones de Carga de Vehículo Eléctrico
Anzola, Jon; Aizpuru, Iosu; Arruti Romero, Asier (2020)En este documento se presentan las arquitecturas avanzadas de convertidores DC-DC basadas en el concepto de Procesado de Potencia Parcial (PPP). Para ello, en primer lugar, se describen las ventajas y desventajas que ... -
Demystifying Non-Isolated DC–DC Topologies on Partial Power Processing Architectures
Anzola, Jon; Aizpuru, Iosu; Arruti Romero, Asier (MDPI, 2022)This paper discusses the possibility of achieving partial power processing with non-isolated DC–DC topologies. To this end, partial power converter architectures are seen as an interesting solution for reducing the power ... -
Dimensionamiento de Sistemas Fotovoltaicos con Almacenamiento Híbrido
GARAYALDE, ERIK; Anzola, Jon; Aizpuru, Iosu (2019)Los sistemas fotovoltaicos aislados de la red eléctrica están generalmente compuestos por una agrupación de paneles fotovoltaicos, un elemento de almacenamiento como baterías, un convertidor DC-DC que actúa como cargador ... -
Elementu pasiboen eragina frekuentzia altuko bihurgailuetan
Arruti Romero, Asier; Anzola, Jon; Aizpuru, Iosu; Mazuela, Mikel (UEU, 2021)Notable technological advancements in power electronics have been made in the last years, such as SiC and GaN based transistors. Still, power converters based on these technologies cannot be fully exploited due to passive ... -
High Efficiency Converters Based on Modular Partial Power Processing for Fully Electric Maritime Applications
Anzola, Jon; GARAYALDE, ERIK; Urkizu, June; Alacano, Argiñe; Lopez Erauskin, Ramon (MDPI, 2023)This paper proposes an approach for analyzing the benefits that partial-power-processing-based converters can bring to fully electric maritime applications. With the aim of making the system modular and scalable to different ... -
Impact of Non-Uniform Flux Density on Core Losses: A Case Study on Standard Core Geometries
Arruti Romero, Asier; Agote San Sebastian, Anartz; Anzola, Jon; Aizpuru, Iosu; Mazuela, Mikel (IEEE, 2024)The non-uniform flux density distribution inside magnetic cores leads to increased overall losses when compared to the commonly used uniform flux density assumption. This effect is amplified if rectangular based core shapes ... -
Non-Isolated Partial Power Converter for Electric Vehicle Fast Charging Stations
Anzola, Jon; Aizpuru, Iosu; Arruti Romero, Asier (IEEE, 2020)In the present paper a partial power converter is proposed for an electric vehicle fast charging station. The main advantage of this type of converter is that it only processes a reduced percentage of the power consumed ... -
Partial Power Converters for DC-DC Applications
Anzola, Jon (Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2023)This thesis studies partial power processing (PPP) based architectures for DC-DC applications. This type of solutions aim to reduce the power processed by the power converter. This way, the power losses and the volume of ... -
Partial Power Processing Based Charging Unit for Electric Vehicle Extreme Fast Charging Stations
Anzola, Jon; Aizpuru, Iosu; Arruti Romero, Asier; Alacano, Argiñe; Lopez Erauskin, Ramon (IEEE, 2020)This paper presents an analysis and design of a charging unit inside an electric vehicle extreme fast charging station. Due to the benefits that partial power processing achieves in terms of size reduction and efficiency ... -
Partial Power Processing Based Converter for Electric Vehicle Fast Charging Stations
Anzola, Jon; Aizpuru, Iosu; Arruti Romero, Asier (MDPI, 2021)This paper focuses on the design of a charging unit for an electric vehicle fast charging station. With this purpose, in first place, different solutions that exist for fast charging stations are described through a brief ... -
Performance Improvement of a Silicon Partial Power Converter over a Silicon Carbide Full Power Converter
Anzola, Jon; Aizpuru, Iosu (IEEE, 2023)This article studies the new benefits that partial power processing brings to Silicon (Si) devices compared to wide-bandgap technologies. To prove this, the proposed case study consists of an on-board charger (OBC) application ... -
Potentzia prozesamendu partzialean oinarritutako bihurgailuak
Anzola, Jon; Aizpuru, Iosu; Arruti Romero, Asier (UEU, 2021)In recent years, many research lines have made efforts to improve the performance of power converters. In this context, literature proposes strategies based on partial power processing, in which the power to be processed ... -
Resonant Dual Active Bridge Partial Power Converter for Electric Vehicle Fast Charging Stations
Anzola, Jon; Aizpuru, Iosu; Arruti Romero, Asier; Lopez Erauskin, Ramon; Alacano, Argiñe (IEEE, 2021)This paper presents an analysis and design of a DC-DC charging unit for an electric vehicle fast charging station. Due to the benefits that partial power processing achieves in terms of size reduction and efficiency ... -
Review of Architectures Based on Partial Power Processing for DC-DC Applications
Anzola, Jon; Aizpuru, Iosu; Arruti Romero, Asier; Alacano, Argiñe; Lopez Erauskin, Ramon (IEEE, 2020)This paper presents a review of advanced architectures based on the partial power processing concept, whose main objective is to achieve a reduction of the power processed by the converter. If the power processed by the ...
