Search
Now showing items 1-9 of 9
Evolution of residual stresses induced by machining in a Nickel based alloy under static loading at room temperature
(Elsevier, 2014)
Tensile residual stresses are very often generated on the surface when machining nickel alloys. In order to determine their influence on the final mechanical behaviour of the component residual stress stability should be ...
Determination of the molecular diffusion coefficients in ternary mixtures by the sliding symmetric tubes technique
(AIP Publishing, 2014)
A new analytical methodology has been developed to determine the diagonal and cross-diagonal molecular diffusion coefficients in ternary mixtures by the Sliding Symmetric Tubes technique. The analytical solution is tested ...
Numerical study of the heat transfer in wound woven wire matrix of a Stirling regenerator
(Elsevier, 2014)
Nusselt number correlation equations are numerically derived by characterizing the heat transfer phenomena through porous medium of both stacked and wound woven wire matrices of a Stirling engine regenerator over a specified ...
Finite element modeling of fretting wear scars in the thin steel wires : Application in crossed cylinder arrangements
(Elsevier Ltd, 2014)
This paper completes a series of two papers in which a FE based methodology for the prediction wear scars in thin steel wires under fretting wear conditions is developed. In the first paper ‘Finite element modeling and ...
Aplicación de un sistema de gestión del mantenimiento basado en un RCM adaptadoApplication of a maintenance management system based on a tailored RCM
(Dyna, 2014)
This paper presents the results of the application of an adapted version of the RCM (Reliability Centered Maintenance) methodology. Through its implementation, three companies of distinct industrial sectors have been capable ...
Mass effect on the soret coefficient in n-alkane mixtures
(AIP Publishing, 2014)
We have determined the Soret coefficient of different equimolar and non equimolar n-alkane mixtures from measurements of the molecular diffusion and thermal diffusion coefficients. It is shown that equimolar mixtures behave ...
Processing of magnesium porous structures by infiltration casting for biomedical applications
(Wiley, 2014)
Magnesium and its alloys are currently considered to be a promising metallic biomaterial. The interest in magnesium alloys arises from their biocompatibility, bioabsorbility and especially from their mechanical properties, ...
Success factors for managing an entrepreneurial university : developing an integrative framework
(Sage Journals, 2014)
The entrepreneurial university is regarded as an agent of societal change and an important instrument in the facilitation of the contemporary knowledge-based economy because it supports the generation and exploitation of ...