Bilatu
48-tik 41-48 emaitza erakusten
Loss Measurement of Low RDS Devices Through Thermal Modelling - The Advantage of Not Turning it Fully On
(IEEE, 2023)
This paper presents and evaluates a novel method for generating power losses on transistors avoiding high currents. These could heat up the circuit tracks, affecting the accurate thermal modeling of the system. The proposed ...
Design and analysis of a voltage ride-through testing solution based on a novel medium-voltage OLTC auto-transformer
(IEEE, 2023)
In this paper, a novel medium-voltage auto-transformer capable of generating under- and over-voltage conditions is introduced. The auto-transformer could emulate grid disturbances at 20kV, 30kV and 35kV, satisfying the ...
A High Frequency Magnetic Test Bench with Fast Isothermal Measurements for Large Cores
(IEEE, 2023)
This paper presents a magnetic core test-bench that has been developed for high-frequency measurements. The bench is able to perform tests at 1 MHz, 300 V and in a range of 20 °C to 150 °C. It exhibits precise temperature ...
Comparison between the ETT and LTT Technologies for Electronic OLTC Transformer Applications
(IEEE, 2023)
This paper introduces a novel electronic tap-changer application for renewables with light-triggered thyristors for medium-voltage transformers. The on-chip functionality and robustness of the thyristor support applications ...
Simulation based IEEE 802.11ad performance assessment in factory workshop
(IEEE, 2023)
The IEEE 802.11ad standard exploits the millimeter wave (mmWave) spectrum, concretely the license-free frequency band in the 57-71 GHz range. Nowadays, this frequency band is mostly unused for use cases related to communication ...
GaN Based Multiphasic Drive for Electric Vehicles
(VDE Verlag, 2023)
This paper presents the design of a six-phase two-level Voltage Source Inverter (VSI) using Gallium Nitride (GaN) semiconductors. The proposed topology consists of three full-bridge branches, where the GaN semiconductors ...
Exploring a Methodological Approach to Assessing the Potential Impact of the Implementation of Circular Economy Strategies on Regional Economies Through Environmentally Extended Input-Output Tables
(DIIM, FTS, University of Novi Sad, 2023)
This article is part of a research stream that aims to evaluate the impact of circular economy policies on greenhouse gas (GHG) emission reduction and the industrial structure of specific regions. Building upon previous ...
Effect of near beta-transus forging parameters on the mechanical and microstructural properties of Ti-6Al-4V: Application to hammer forging
(Materials Research Forum LLC., 2023)
Ti-6Al-4V is a widely employed material in the aerospace, power generation and bioengineering industries due to its low density, excellent corrosion resistance and outstanding mechanical properties. Hammer forging is one ...