Recent Submissions

  • Development of innovative suspensions for a radio-controlled light racing car. Collaborative project into 3DExperience platform 

    Torca de la Concepción, Ireneo; Gomendio Ruiz, Amaia; Ugarte Barrena, Done (SEFI - Société Européenne pour la Formation des Ingénieurs; Technical University of Denmark, 2018)
  • Influence of Surface Finish and Porosity on the Fatigue behaviour of A356 Aluminium Casting Alloy 

    Hidalgo Coca, Raquel; Esnaola Ramos, Jon Ander; Llavori Osa, Iñigo; Larrañaga Serna, Miren; Herrero Dorca, Nuria; Hurtado Hurtado, Iñaki; Kortabarria Lezeta, Aitor (EDP Sciences, 2018)
    In casting parts, due to the manufacturing process, the presence of defects such as porosity, inclusions and oxide films is unavoidable. All these irregularities have a negative effect on the component ...
  • Effect of alumina tri-hydrate filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites 

    Tena Merino, Iosu; Sáenz Domínguez, Iván; Sarrionandia Ariznabarreta, Mª Asun; Aurrekoetxea Narbarte, Jon (2018)
    This research study is focused on the effect of alumina tri-hydrate (ATH) filler on the mechanical and optical properties of flame-retardant ultraviolet cured vinyl ester composites. In particular, vinyl ester formulations ...
  • Analysis of axial crushing behaviour of unsaturated polyester and vinyl ester composites manufactured by out of die ultraviolet cured pultrusion 

    Sáenz Domínguez, Iván; Tena Merino, Iosu; Esnaola Arruti, Aritz; Sarrionandia Ariznabarreta, Mª Asun; Aurrekoetxea Narbarte, Jon (2018)
    This paper analyses the axial crushing behaviour and flexural properties of novel unsaturated polyester (UP) and vinyl ester (VE) composites, manufactured by out of die ultraviolet (UV) cured pultrusion. The relation between ...
  • The Way Cyber Physical Systems Will Revolutionise Maintenance 

    Zurutuza Ortega, Urko (CISTER Research Center, 2017)
    The way maintenance is carried out is altering rapidly. The introduction of Cyber Physical Systems (CPS) and cloud technologies are providing new technological possibilities that change dramatically the way it is possible ...
  • Fluido magnetikoen portaera magneto-reologiko eta biskoelastikoa 

    Berasategui Arostegui, Joanes; Elejabarrieta Olabarri, María Jesús; Bou-Ali, M. Mounir; Garmendia, Izaro (Mondragon Unibertsitateko Zerbitzu Editoriala, 2012)
    Fluido magnetikoak likido eramaile eta partikula magnetikoez daude osatuta, eta beraien portaera aplikatutako eremu magnetikoaren menpekoa da. Lan honetan, olio mineralez, sufaktante batez, likatzaile batez eta partikula ...
  • The use of areal surface topography characterisation in relation to fatigue performance 

    Zabala Eguren, Alaitz; Llavori Osa, Iñigo; Tato Vega, Wilson; Aginagalde Lopez, Andrea; Gómez Rodríguez, Xabier (EDP Sciences, 2018)
    Although the effect of surface topography on fatigue life is widely accepted, the underlying role of surface roughness from first principles is still poorly understood. Currently approaches which consider the ...
  • Personas for policy-making and healthcare design 

    González de Heredia López de Sabando, Arantxa; Justel Lozano, Daniel; Iriarte Azpiazu, Ion (University of Zagreb, 2018)
    The tool Personas has been used by different research teams to represent diversity among elderly people. This tool has been widely used in the discipline of product and service design and in recent years has spread to other ...
  • Hacia un modelo cuantitativo de Personas 

    González de Heredia López de Sabando, Arantxa; Justel Lozano, Daniel; Iriarte Azpiazu, Ion; Beitia Amondarain, Amaia (AEIPRO, 2018)
    La herramienta Personas es una herramienta extendida en el mundo del diseño de producto y el diseño web. En los últimos años nuevas disciplinas como el diseño de servicios y el diseño estratégico han hecho que las herramientas ...
  • MDE based IoT Service to enhance the safety of controllers at runtime 

    Illarramendi Rezabal, Miren; Etxeberria Elorza, Leire; Elkorobarrutia Letona, Xabier; Pérez Lázare, Txema; Larrinaga Barrenechea, Félix; Sagardui Mendieta, Goiuria (Aachen University, 2019)
    One of the challenges for complex IoT software systems is toincrease their safety. A Model Driven Development approach helps in the design and development phase of these systems while runtime checkin gtechniques help to ...
  • Data-driven Workflow Management by utilising BPMN and CPN in IIoT Systems with the Arrowhead Framework 

    Larrinaga Barrenechea, Félix (IEEE, 2019)
    Workflow management is realised in manufacturing at the Enterprise- and Production (workstation) levels. The characteristics of business processes in these levels differ enough to prevent the adoption of ...
  • Stability and parking cross distance adapter mechanism for electric vehicle 

    Izquierdo Ortiz de Landaluce, Mikel; Ulacia Garmendia, Ibai (2017 EAEC European Automotive Congress, 2017)
    Due to the actual vehicle dimensions, low occupancy rates and the increase of world population, a trend to develop new vehicle concepts with smaller dimensions is seen. The objective of this trend is to reduce traffic ...
  • Aesthetic interaction consistency: exploring the foundation for static and dynamic aesthetics 

    González Ochoantesana, Itsaso; Val Jauregi, Esther; Justel Lozano, Daniel; Iriarte Azpiazu, Ion; Lasa Erle, Ganix (The Design Society, 2018)
    Aesthetics is a powerful means for creating consistency across a product range. During the design process consistency is subject to risk. The existing tools do not integrate static as well as dynamic approaches. This paper ...
  • Evaluating inclusivity using quantitative personas 

    González de Heredia López de Sabando, Arantxa (Design Research Society DRS, 2018)
    Exclusion assessment is a powerful method for assessing inclusivity in a quantitative way. However, its focus on capability data makes it difficult to consider the effect of other factors such as different ways of using a ...
  • An ad-hoc fretting wear tribotester design for thin steel wires 

    Llavori Osa, Iñigo; Zabala Eguren, Alaitz; Tato Vega, Wilson; Aginagalde López, Andrea; Gómez Rodríguez, Xabier (EDP Sciences, 2018)
    Steel wire ropes experience fretting wear damage when the rope runs over a sheave promoting an oscillatory motion between the wires. Consequently, wear scars appear between the contacting wires leading to an ...
  • The influence of adapted interactive environments in current industrial interfaces aceptance 

    Mazmela Echave, Maitane; Lasa Erle, Ganix; Aranburu Zabalo, Erik; González Ochoantesana, Itsaso; Val Jauregi, Esther (AEIPRO, 2018)
    User experience is a growing field of research, which in recent years has gained considerable interest. During the last two decades, various models have been proposed to understand why users accept technologies ...
  • Análisis Numérico del Efecto de la Termoforesis para la Separación de Diferentes Poblaciones de Exosomas 

    Aginagalde Unanue, Maialen; Martín Mayor, Alain; Bou-Ali, M. Mounir (Servicio Editorial de la Universidad del País Vasco, 2017)
    Los sistemas microfluídicos han demostrado ser una alternativa prometedora ante procesos convencionales de separación y caracterización. Este trabajo muestra el estudio numérico del fenómeno de la termoforesis en un ...
  • New approaches to integrating emotional aspects in the euristic evaluation of digital solutions 

    Lasa Erle, Ganix; Aranburu Zabalo, Erik; Mazmela Echave, Maitane; Justel Lozano, Daniel; Reguera Bakhache, Daniel (AEIPRO, 2018)
    The appearance of new technologies such as Eye-tracking are enabling to collect human-computer interaction related data that until now was unknown. There are alternatives with a larger baggage in the field ...
  • La importancia de la relación empresa-universidad en la formación del alumno 

    Lizarralde Urrutia, Osane; Pérez Lázare, Txema; Larrinaga Barrenechea, Félix (Asociación de Enseñantes Universitarios de la Informática (AENUI), 2018)
    The Computer Science Engineering Degree includes an in-companytrainingexperience for students with professional assistance from university. Two pro-grams address this initiative objective is the im-provements ...
  • A numerical analysis of multiaxial fatigue in a butt weld specimen considering residual stresses 

    Llavori Osa, Iñigo; Esnaola Ramos, Jon Ander; Etxebarria, Unai; Lopez Jauregui, Arkaitz; Ulacia Garmendia, Ibai; Ugarte Barrena, Done; Larrañaga Serna, Miren (EDP Sciences, 2018)
    Residual Stress (RS) pattern changes considerably depending on the width of the plates and the welding parameters, having effect on the fatigue strength. Most of the standards do not consider them and in some works, yield ...

View more