Bilatu
4893-tik 481-490 emaitza erakusten
Monitoring of Critical Assets
(River Publishers, 2018)
Neural Network Direct Control with Online Learning for Shape Memory Alloy Manipulators
(MDPI AG, 2019)
New actuators and materials are constantly incorporated into industrial processes, and additional challenges are posed by their complex behavior. Nonlinear hysteresis is commonly found in shape memory alloys, and the ...
Eraldaketa globalari neurria hartzen: euskal gizartea aro ekonomiko berrianLanki kuadernoak = Cuadernos Lanki ; 13
(Mondragon Unibertsitatea. Humanitate eta Hezkuntza Zientzien FakultateaMondragon Unibertsitateko Zerbitzu Editoriala, 2020)
Adaptive coatings based on polyaniline for direct 2D observation of diffusion processes in microfluidic systems
(Elsevier, 2016)
Microfluidic devices are poised to dramatically influence the future of the process industry. Therefore the understanding and proper evaluation of the flow and mixing behaviour at microscale becomes a very important issue. ...
Finite Element Prediction of the Tool Wear Influence in Ti6Al4V Machining
(Elsevier, 2015)
Ti6Al4 V is a titanium alloy widely used in the aeronautical industry and machining is often adopted to manufacture it. These parts must satisfy requirements specified by the customer. A crucial characteristic of aircraft ...
Evolution of residual stresses induced by machining in a Nickel based alloy under static loading at room temperature
(Elsevier, 2014)
Tensile residual stresses are very often generated on the surface when machining nickel alloys. In order to determine their influence on the final mechanical behaviour of the component residual stress stability should be ...
Machining behaviour of Ti-6Al-4V and Ti-5553 alloys in interrupted cutting with PVD coated cemented carbide
(Elsevier, 2012)
Machining behaviour of Ti-5553, Ti-6Al-4 V mill-annealed (MA) and Ti-6Al-4 V solution treated and aged (STA) alloys was studied in different interrupted cutting operations using PVD coated cemented carbide tools. Single ...
Numerical Simulation of Surface Modification During Machining of Nickel-based Superalloy
(Elsevier, 2015)
The main objective of this study is to implement a reliable FE model of the orthogonal machining of a Nickel based superalloy for the prediction of microstructural changes occurring during the process. A FE numerical model ...
A sensibility analysis to geometric and cutting conditions using the particle finite element method (PFEM)
(Elsevier, 2013)
The (PFEM) is employed to simulate orthogonal metal cutting of 42CD4 steel. The objectives of this work are mainly three: The first one is to validate PFEM strategies as an efficient tool for numerical simulation of metal ...
Konpetentzia Digitalak. Graduko ikasleentzako formakuntza materialak: 1. Informazioa eta datuen tratamendua 1.1. Nabigazioa, bilaketak eta informazioaren filtratzea, datuak eta eduki digitalak. 1.1.1. Gaiaren definizioa eta testuinguruan kokatzeaCompetencias Digitales. Materiales de formación para estudiantes de grado: 1. Información y tratamiento de datos 1.1. Navegación, búsqueda y filtrado de información, datos y contenidos digitales. 1.1.1. Definición y contextualización del tema
(Mondragon Unibertsitatea, 2020)
Lanaren gaia definitu. Gako-hitzak identifikatu. Sinonimoak eta hitz alternatiboak pentsatu. Probatu zure bilaketa estrategia. Bilaketarako aholkuak.