Bilatu
3038-tik 301-310 emaitza erakusten
Evolution of residual stresses induced by machining in a Nickel based alloy under static loading at room temperature
(Elsevier, 2014)
Tensile residual stresses are very often generated on the surface when machining nickel alloys. In order to determine their influence on the final mechanical behaviour of the component residual stress stability should be ...
Machining behaviour of Ti-6Al-4V and Ti-5553 alloys in interrupted cutting with PVD coated cemented carbide
(Elsevier, 2012)
Machining behaviour of Ti-5553, Ti-6Al-4 V mill-annealed (MA) and Ti-6Al-4 V solution treated and aged (STA) alloys was studied in different interrupted cutting operations using PVD coated cemented carbide tools. Single ...
Numerical Simulation of Surface Modification During Machining of Nickel-based Superalloy
(Elsevier, 2015)
The main objective of this study is to implement a reliable FE model of the orthogonal machining of a Nickel based superalloy for the prediction of microstructural changes occurring during the process. A FE numerical model ...
A sensibility analysis to geometric and cutting conditions using the particle finite element method (PFEM)
(Elsevier, 2013)
The (PFEM) is employed to simulate orthogonal metal cutting of 42CD4 steel. The objectives of this work are mainly three: The first one is to validate PFEM strategies as an efficient tool for numerical simulation of metal ...
Simulation of distortion due to machining of thin-walled components
(Elsevier, 2013)
The distortion of components is strongly related to the residual stress state induced by manufacturing processes like heat treatment, forming or machining. Each process step affects the initial stress state of the following ...
Evolution of Surface Roughness in Grinding and its Relationship with the Dressing Parameters and the Radial Wear
(Elsevier, 2013)
Grinding is a machining process specially indicated for finishing operations in hard materials, in order to obtain low surface roughness (Ra 0.1 μm to 2μm) and tight tolerances. The cutting tool is the grinding wheel which ...
Membrane-containing virus particles exhibits mechanics of a composite material for genome protection
(Royal Society of Chemistry, 2018)
The protection of the viral genome during extracellular transport is an absolute requirement for virus survival and replication. In addition to the almost universal proteinaceous capsids, certain viruses add a membrane ...
A Design Thinking approach to introduce entrepreneurship education in European school curricula
(Taylor & Francis, 2017)
Design Thinking is visualized as the central strategy to promote entrepreneurial skills in European schools. Europe needs future generations to be more entrepreneurial in their attitudes to achieve a strong position in the ...
Surface machining condition and fatigue life on Inconel 718
(Elsevier, 2018)
Life assessment of components working in aero-engines at elevated temperatures is critical. Machining has a serious effect on these nickel-based alloys, for example in turbine discs, affecting their life in service. Machining ...
Beyond customer satisfaction. Supporting organisational change through Service Design. A case study in the insurance industry
(Taylor & Francis, 2017)
Insurance companies are in the midst of massive disruptive change occurring as a result of new consumption models and technologies. Companies unable to keep up with the rapid pace of change run the risk of disappearing. ...