Bilatu
14-tik 1-10 emaitza erakusten
Analysis of One-Way and Two-Way FSI Approaches to Characterise the Flow Regime and the Mechanical Behaviour during Closing Manoeuvring Operation of a Butterfly Valve
(World Academy of Science, Engineering and Technology, 2018)
Butterfly valves are widely used industrial piping components as on-off and flow controlling devices. The main challenge in the design process of this type of valves is the correct dimensioning to ensure ...
Experimental uncertainty decompositions of aerodynamic coefficients affected by operative condition variations
(Elsevier Ltd., 2020)
A twofold analysis is performed on an experimental set-up comprising a low-Reynolds wind tunnel, with the aim of quantifying the effect of measurand uncertainties and operative condition variations in the lift and drag ...
Contact angle measurement for LiBr aqueous solutions on different surface materials used in absorption systems
(Elsevier Ltd., 2018)
Wetting surface is a very important issue for the design of absorption applications and heat exchangers. The contact angle is deemed essential in wettability studies; However, LiBr aqueous solution contact angle studies ...
Assessing the statistical validity of momentum-deficit-based measurements in turbulent configurations
(Elsevier Ltd., 2021)
An application-agnostic procedure is outlined for checking the validity of momentum-deficit-based drag measurements performed under different turbulent conditions in a wind tunnel. The approach defines a two-step methodology: ...
Numerical-probabilistic assessment of tempered glass failure based on the generalised local model characterised by annealed plates
(Elsevier, 2022)
Large-scale experimental programmes become unavoidable to characterise the fracture behaviour of glass. Additionally, if non-uniform residual stresses are to be considered, the total effort required increases significantly. ...
Parametric Optimisation of a Direct Liquid Cooling–Based Prototype for Electric Vehicles Focused on Pouch-Type Battery Cells
(MDPI, 2022)
In this work, a numerical optimisation process is applied to improve the fluid dynamical aspect of an innovative direct liquid cooling strategy for lithium-ion–based HEV/EV. First, the thermofluidic numerical model of the ...
A novel direct liquid cooling strategy for electric vehicles focused on pouch type battery cells
(Elsevier Ltd., 2022)
In this work, a novel direct liquid cooling strategy for a large-scale lithium-ion pouch type cell is proposed to control the cell working temperature within the optimum range of performance and safety. With a modular ...
Numerical methodology based on fluid-structure interaction to predict the residual stress distribution in glass tempering considering non-uniform cooling
(Elsevier, 2022)
In this paper a novel numerical methodology for calculating non-uniform residual stress distributions during the glass tempering process is presented. Tempering techniques lead to non-uniform heat transfer rates causing ...
Numerical analysis of different mass transfer models for falling film absorbers
(Elsevier Ltd., 2022)
Different methodologies have been used in the literature to determine the absorbed vapour mass flux in falling film absorbers. So far, however, there has been little discussion about the impact of different ap- proaches ...
A proper orthogonal decomposition analysis upon aerodynamic structures under clean and rough conditions
(AIP Publishing, 2023)
A transitional flow regime is known to induce complex flow structures upon aerodynamic geometries such as airfoils, and the dynamics of laminar separation bubbles (LSBs) pose a relevant research field. In addition to being ...