Buscar
Mostrando ítems 11-20 de 22
New drawbead tester and numerical analysis of drawbeads closure force
(Springer, 2021)
Currently, a great deal of controversy exists regarding the real forces generated in drawbeads during sheet metal forming processes. The present work focuses on the analysis of the uplift force. First, a detailed literature ...
The Interaction between the Sheet/Tool Surface Texture and the Friction/Galling Behaviour on Aluminium Deep Drawing Operations
(MDPI, 2021)
The increasing demands for lightweight design in the transport industry have led to an extensive use of lightweight materials such as aluminium alloys. The forming of aluminium sheets however presents significant challenges ...
Comparison of the hardening behaviour of different steel families : from mild and stainless steel to advanced high strength steels
(Elsevier Ltd., 2015)
Although steel has been used in vehicles from the automotive industry's inception, different steel gradesare continually being developed in order to satisfy new fuel economy requirements. For example,advanced high strength ...
Influence of the pressure dependent coefficient of friction on deep drawing springback predictions
(Elsevier Ltd., 2016)
The aim of this work is to show the influence of defining a pressure dependent friction coefficient onnumerical springback predictions of a DX54D mild steel, a HSLA380 and a DP780 high strength steel. Thepressure dependent ...
Elastic behaviour characterisation of TRIP 700 steel by means of loading-unloading tests
(Elsevier Ltd., 2015)
The elastic behaviour of TRIP 700 steel under plastic deformation is analysed. The analysis is carried out by means of classical tensile test and loading–unloading cyclic tests. These tests have been performed using high ...
Friction Modelling for Tube Hydroforming Processes : A Numerical and Experimental Study with Different Viscosity Lubricants
(MDPI, 2022)
The final quality of sheet and tube metal–formed components strongly depends on the tribology and friction conditions between the tools and the material to be formed. Furthermore, it has been recently demonstrated that ...
Hardening prediction of diverse materials using the Digital Image Correlation technique
(Elsevier, 2018)
In recent years, due to the introduction of higher resistance materials in the automotive sector, sheet metal-forming tool-makers have been forced to deal with more challenging process designs. Therefore, the optimisation ...
Substitutive Press-Bolster and Press-Ram Models for the Virtual Estimation of Stamping-Tool Cambering
(MDPI, 2021)
Today’s stamping simulations are realized by ignoring the elastic deformation of the press and tooling system through the assumption of a rigid behavior and a perfect press stroke. However, in reality, the press and tool ...
Analysis of the mechanical and microstructural fluctuations of high-strength steels and their effect on bending angle
(MDPI, 2023)
The quality and complexity demands of manufactured parts in sectors such as automotive and aeronautics lead to narrower process windows. This affects the repeatability and stability of the process, where material properties ...
Soft sensing force measurement approach in sheet metal forming facilities
(IOP Publishing, 2020)
Process stability and facility security are the two main purposes for measuring the force in sheet metal forming facilities. These two purposes look for guaranteeing the good health of the facility avoiding overloads and ...