Bilatu
14-tik 1-10 emaitza erakusten
Influencia del agua de mar en el comportamiento frente a impacto de baja energía de un nuevo laminado de resina natural reforzada con fibra de fique colombianoInfluence of seawater immersion in low energy impact behavior of a novel colombian fique fiber reinforced bio-resin laminate
(Universidad Nacional de Colombia, 2015)
This experimental work is aimed at the influence of seawater immersion in low impact energy behavior of a novel Colombian fique fiber reinforced bio-resin laminate. Such material was manufactured by vacuum infusion. The ...
Numerical Simulation of Surface Modification During Machining of Nickel-based Superalloy
(Elsevier, 2015)
The main objective of this study is to implement a reliable FE model of the orthogonal machining of a Nickel based superalloy for the prediction of microstructural changes occurring during the process. A FE numerical model ...
Uncertainty of Temperature Measurements in Dry Orthogonal Cutting of Titanium Alloys
(Elsevier, 2015)
Infrared radiation thermometer is used to measure the temperature of tool during dry orthogonal cutting of titanium alloys. The accuracy of measured temperature depends on several parameters such as the experimental set-up, ...
Eyeface : a new multimethod tool to evaluate the perception of conceptual user experiences
(Elsevier, 2015)
Based on the identification of a new multimethod tool necessity, a new tool called Eyeface has been created by combining two different devices: the Eye-tracking and the Facereader. This research work analyses a new multimethod ...
Optimizing Polymer Lab-on-Chip Platforms for Ultrasonic Manipulation: Influence of the Substrate
(MDPI, 2015)
The choice of substrate material in a chip that combines ultrasound with microfluidics for handling biological and synthetic microparticles can have a profound effect on the performance of the device. This is due to the ...
Desarrollo de competencias y habilidades a través de proyectos basados en empresas reales : análisis en asignaturas de Dirección de OperacionesTeaching Operations Management through real case studies: development of skills and competences
(AECA, Universidad de Sevilla, 2015)
The main aim of our work is to show how a student may get competences and skills through the development of real case studies. We implement this study in Operations Management courses of different Spanish universities. The ...
Diagnosis and new challenges on design. The case of Mondragon Corporation's industry areaDiagnóstico y nuevos retos del diseño industrial. El caso del área industrial de la Corporación Mondragón
(Elsevier Ltd, 2015)
La integración del diseño en los procesos de innovación conlleva una mejora de la competitividad. No obstante, investigaciones a nivel estatal indican que en la industria predomina todavía una visión estético-funcional del ...
Metal cutting experiments and modelling for improved determination of chip/tool contact temperature by infrared thermography
(Elsevier Ltd, 2015)
Temperature measurement in metal cutting at the chip and work contact is of central importance due to temperature dependence of tool wear and surface integrity. Infrared thermography is commonly employed to determine the ...
Procedure to predict residual stress pattern in spray transfer multipass welding
(Springer, 2015)
Gas metal arc welding (GMAW) is one of the most used joining method in the industry. However, one of the main problems of this process is the generation of residual stresses which have direct impact on the fatigue life of ...
Hybrid ac/dc microgrids. Part II : Review and classification of control strategies
(Elsevier, 2015)
Microgrids are envisioned as one of the most suitable alternatives for the integration of distributed generation units in the utility grid, as they efficiently combine generation, energy storage and loads in the same ...