Bilatu
51-tik 41-50 emaitza erakusten
Effect of Tool Geometry and LCO2 Cooling on Cutting Forces and Delamination when Drilling CFRP Composites Using PCD Tools
(Elsevier, 2022)
Lightweight materials like Carbon Fiber Reinforced Polymers (CFRPs) present certain challenges, mainly regarding the resultant surface integrity of the holes. Different techniques such as optimized tool geometries, machining ...
Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V
(Trans Tech Publications, 2022)
The reliability of the pertinent parameters set of Johnson-Cook constitutive model is highly linked with the friction condition at the tool-chip-workpiece interface. In the present work, a study on the influence of Coulomb’s ...
Influence of cryogenic grinding surface on fatigue performance of carburised 27MnCr5
(Elsevier, 2023)
Automotive transmission components are subjected to cyclic loads and, thus, must have a reliable fatigue performance. Since fatigue cracks nucleate at the surface, it is necessary to guarantee that its surface integrity ...
Application of material constitutive and friction models parameters identified with AI and ALE to a CEL orthogonal cutting model
(Elsevier B.V., 2023)
The identification of input parameters for funite element modelling of the cutting process is still a complex task as the experimental testing equipment cannot reach its combined levels of strains, strain rates and ...
Hole quality analysis of AISI 304-GFRP stacks using robotic drilling
(Elsevier B.V., 2022)
Although drilling of FRP - metal stacks is the most widely used machining operation for these materials, it remains challenging in many aspects (tool wear, vibrations, delamination, poor surface finish, etc). In this ...
Force Prediction Methodology for Complex Shape Broaching
(Elsevier B.V., 2023)
Broaching is widely used for the manufacturing of complex geometries which requires high dimensional accuracy and surface finishing (e.g., fir tree, dovetail). A software development for force prediction in complex shape ...
Digital Twin for Final Generated Surface Dimensional Error Analysis at Tool Path Level in Contour Milling
(Elsevier B.V., 2023)
Surface errors in contour milling due to force induced tool deflections have a direct impact on the dimensional and geometrical accuracy of the finished part. In this sense, virtual manufacturing systems provide the ...
Numerical modelling of the drag finishing process at a macroscopic scale to optimize surface roughness improvement on additively manufactured (SLM) Inconel 718 parts
(Elsevier B.V., 2022)
Drag finishing is one of the mass finishing processes that enhances surface roughness on complex and rough parts produced by additive manufacturing. This paper proposes a model to simulate abrasive media flowing around the ...
Mechanical properties of friction induced nanocrystalline pearlitic steel
(Springer Nature, 2022)
Nanocrystalline structured variants of commercially available alloys have shown potential for boosting the mechanical properties of these materials, leading to a reduction in waste and thereby retaining feasible supply ...
Mechanical Properties and Fatigue Performance of 17-4 PH Stainless Steel Manufactured by Atomic Diffusion Additive Manufacturing Technology
(MDPI, 2023)
Additive Manufacturing (AM) is gaining importance as an alternative and complementary technology to conventional manufacturing processes. Among AM technologies, the Atomic Diffusion Additive Manufacturing (ADAM) technology ...