Bilatu
35-tik 21-30 emaitza erakusten
Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model
(Springer, 2021)
Cold forging is a manufacturing process where a bar stock is inserted into a die and squeezed with a second closed die. It is one of the most widely used chipless forming processes, often requiring no machining or additional ...
Contact pressure and sliding velocity ranges in sheet metal forming simulations
(2021)
In the last few years many efforts have been carried out in order to better understand what the real contact between material and tools is. Based on the better understanding new friction models have been developed which ...
Digital twin development for the sensitivity analysis of near solidus forming process
(Materials Research Forum LLC, 2023)
Near Solidus Forming (NSF) process, performed at semi-solid material state is gaining popularity due to its good physical properties, low manufacturing cost and material waste. Although the process possesses many advantages ...
Perfilado 4.0: ayuda a la puesta a punto y aseguramiento de la calidad en procesos de perfilado
(2019)
Una problemática a la que se enfrentan las empresas de perfilado de chapa es la laboriosa, y con ello costosa, puesta a punto del proceso. En ella los operarios basan sus decisiones en experiencias pasadas y en la mayoría ...
Sensitivity Analysis of Near Solidus Forming (NSF) Process with Digital Twin Using Taguchi Approach
(Springer Nature, 2024)
Forging at near solidus material state takes advantage of the high ductility of the material at the semi solid or soft-solid state while keeping most of the mechanical properties of a forged part. The technology is at ...
Numerical study of advanced friction modelling for sheet metal forming: influence of the die local roughness
(Elsevier Ltd., 2022)
Numerical simulation of sheet metal forming processes has become indispensable in the last decades. Although the complexity of the frictional behaviour is identified as a key factor for the prediction accuracy, the industry ...
Characterization of Ti64 forging friction factor using ceramic coatings and different contact conditions
(Elsevier, 2017)
Hot forging processes are highly influenced by the contact conditions between the billet and the dies. A wrong definition of the contact conditions may lead to wrong predictions of the final component geometry, the quantity ...
Hardening prediction of diverse materials using the Digital Image Correlation technique
(Elsevier, 2018)
In recent years, due to the introduction of higher resistance materials in the automotive sector, sheet metal-forming tool-makers have been forced to deal with more challenging process designs. Therefore, the optimisation ...
Contact pressure, sliding velocity and viscosity dependent friction behavior of lubricants used in tube hydroforming processes
(2021)
The final quality of sheet and tube metal formed components strongly depends of the tribology and friction conditions between the tools and the material to be formed. Furthermore, it has been recently demonstrated that ...
Initiation of dynamic recrystallization of as-cast N08028 alloy
(ESAFORM, 2021)
The use of high nickel content austenitic stainless steels (SASS) has significantly increased in the last decade. The corrosion and high fatigue resistance of these materials make them suitable for manufacturing oil country ...