Bilatu
39-tik 21-39 emaitza erakusten
Multi revolution finite element model to predict machining induced residual stresses in Inconel 718
(Elsevier, 2013)
Inconel 718 is commonly used in structural critical components of aircraft engines due to its mechanical thermal properties at high temperatures, which makes it to be considered as a difficult to machine material. In these ...
A sensibility analysis to geometric and cutting conditions using the particle finite element method (PFEM)
(Elsevier, 2013)
The (PFEM) is employed to simulate orthogonal metal cutting of 42CD4 steel. The objectives of this work are mainly three: The first one is to validate PFEM strategies as an efficient tool for numerical simulation of metal ...
Simulation of distortion due to machining of thin-walled components
(Elsevier, 2013)
The distortion of components is strongly related to the residual stress state induced by manufacturing processes like heat treatment, forming or machining. Each process step affects the initial stress state of the following ...
Innovative Method dedicated to the development of a ferrite-pearlite grade regarding its MAChinability (IMMAC): final report
(Oficina de Publicaciones de la Unión Europea, 2019)
Ferrite-pearlite (FP) steels are the most common material for engineering and automotive industries (gear box parts, crankshaft, connecting rods, injection parts…). Without any extensive research, considering the different ...
Finding correlations between tool life and fundamental dry cutting tests in finishing turning of steel
(Elsevier, 2015)
Tool life is usually measured by end tool life tests, however, such experiments are costly and time consuming. Establishing correlation between these tests and shorter and cheaper tests is consequently of great interest. ...
Effect of heat Treatment Conditions on the Machinability of Ti64 and Ti54 M Alloys
(Elsevier, 2012)
Orthogonal tests on cylindrical workpieces were carried out to analyze the effect of heat treatment on the machinability of newly developed Ti54M titanium alloy in comparison with Ti64. This paper focuses on the comparison ...
A comparative study of residual stress profiles on Inconel 718 induced by dry face turning
(Elsevier, 2011)
Residual stress profiles induced by different dry face turning conditions are compared employing X-ray diffraction method, Hole-Drilling method and Finite Element Modelling. It is well known that the surface integrity ...
Heat transferred to the workpiece based on temperature measurements by IR technique in dry and lubricated drilling of Inconel 718
(Elsevier, 2016)
In manufacturing aeronautical critical components, such as turbine discs commonly made of Inconel 718, surface integrity is crucial to ensure their fatigue life. Among the machining processes used, the drilling operation ...
Uncertainty of Temperature Measurements in Dry Orthogonal Cutting of Titanium Alloys
(Elsevier, 2015)
Infrared radiation thermometer is used to measure the temperature of tool during dry orthogonal cutting of titanium alloys. The accuracy of measured temperature depends on several parameters such as the experimental set-up, ...
A Note on Interpreting Tool Temperature Measurements from Thermography
(Taylor & Francis, 2015)
Thermography (thermal imaging) is a well-established experimental method for studying cutting tool temperature distributions. In one form, cutting edge temperatures within the chip / tool contact area are deduced from ...
Determining tool/chip temperatures from thermography measurements in metal cutting
(Elsevier, 2018)
Temperature measurement in metal cutting is of central importance as tool wear and surface integrity have been demonstrated to be temperature dependent. In this context, infrared thermography is presented as a reliable ...
Reduction of distortions in large aluminium parts by controlling machining-induced residual stresses
(Springer, 2018)
Large aluminium monolithic parts used in the aeronautic industry frequently show significant geometric distortions after the machining process. These distortions are the consequence of the initial residual stresses of the ...
Metal cutting experiments and modelling for improved determination of chip/tool contact temperature by infrared thermography
(Elsevier Ltd, 2015)
Temperature measurement in metal cutting at the chip and work contact is of central importance due to temperature dependence of tool wear and surface integrity. Infrared thermography is commonly employed to determine the ...
Evaluation of different flow stress laws coupled with a physical based ductile failure criterion for the modelling of the chip formation process of Ti-6Al-4V under broaching conditions
(Elsevier, 2019)
During the machining of Ti-6Al-4V the changing deformation mechanisms produce a complex microstructure of segmented chips, which directly influenced tool-wear and process stability. Numerical simulation could give an insight ...
Tool Damage and Adhesion Effects in Turning and Drilling of Hardened Steels
(World Academy of Science, 2016)
Noteworthy results have been obtained in the turning and drilling of hardened high-strength steels using tungsten carbide based cutting tools. In a finish turning process, it was seen that surface roughness and tool flank ...
Microstructural aspects of the transition between two regimes in orthogonal cutting of AISI 1045 steel
(Elsevier, 2018)
In depth understanding of tool-chip friction behavior is a significant aspect for tool wear performance in steels. In the present work attention has been paid to the strain mode of the chip section in contact with the rake ...
A useful analytical formula to avoid thermal damage in the adaptive control of dry surface grinding
(Elsevier, 2016)
An adaptive control is proposed for dry surface grinding to extend the use of the wheel without needing to be dressed, preserving at the same time the surface integrity of the workpiece. The implementation of this adaptive ...
Wear-related phenomena in advanced materials
(Hindawi, 2011)
The title of this editorial reflects an effort in creating a unique research forum, to harbor fundamental as well as review articles, meeting the forefront of this scientific field. The Guest Editors sought to attract ...
Influence of tool wear on residual stresses when turning Inconel 718
(Elsevier, 2016)
This paper analyzes the effect of tool wear on residual stresses when turning. Inconel 718 discs were machined for prolonged periods at several cutting speeds, feed-rates and depth of cut. Tests were interrupted to measure ...