Bilatu
62-tik 41-50 emaitza erakusten
Exploring the effectiveness of using internal CNC system signals for chatter detection in milling process
(Elsevier, 2023)
Chatter is a harmful self-excited vibration that commonly occurs during milling processes. Data-driven chatter detection and prediction is critical to achieve high surface quality and process efficiency. Most existing ...
A tribological characterisation of Ti-48Al-2Cr-2Nb and Ti-6Al-4V alloys with dry, flood, and MQL lubricants
(Elsevier, 2023)
The development of cutting tools requires the knowledge of tribological phenomena at the tool – workpiece contact area. This knowledge is in dearth particularly for difficult-to-cut alloys like gamma titanium aluminide ...
Effect of Tool Geometry and LCO2 Cooling on Cutting Forces and Delamination when Drilling CFRP Composites Using PCD Tools
(Elsevier, 2022)
Lightweight materials like Carbon Fiber Reinforced Polymers (CFRPs) present certain challenges, mainly regarding the resultant surface integrity of the holes. Different techniques such as optimized tool geometries, machining ...
Influence of Coulomb’s Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V
(Trans Tech Publications, 2022)
The reliability of the pertinent parameters set of Johnson-Cook constitutive model is highly linked with the friction condition at the tool-chip-workpiece interface. In the present work, a study on the influence of Coulomb’s ...
Influence of cryogenic grinding surface on fatigue performance of carburised 27MnCr5
(Elsevier, 2023)
Automotive transmission components are subjected to cyclic loads and, thus, must have a reliable fatigue performance. Since fatigue cracks nucleate at the surface, it is necessary to guarantee that its surface integrity ...
Application of material constitutive and friction models parameters identified with AI and ALE to a CEL orthogonal cutting model
(Elsevier B.V., 2023)
The identification of input parameters for funite element modelling of the cutting process is still a complex task as the experimental testing equipment cannot reach its combined levels of strains, strain rates and ...
Hole quality analysis of AISI 304-GFRP stacks using robotic drilling
(Elsevier B.V., 2022)
Although drilling of FRP - metal stacks is the most widely used machining operation for these materials, it remains challenging in many aspects (tool wear, vibrations, delamination, poor surface finish, etc). In this ...
Force Prediction Methodology for Complex Shape Broaching
(Elsevier B.V., 2023)
Broaching is widely used for the manufacturing of complex geometries which requires high dimensional accuracy and surface finishing (e.g., fir tree, dovetail). A software development for force prediction in complex shape ...
Digital Twin for Final Generated Surface Dimensional Error Analysis at Tool Path Level in Contour Milling
(Elsevier B.V., 2023)
Surface errors in contour milling due to force induced tool deflections have a direct impact on the dimensional and geometrical accuracy of the finished part. In this sense, virtual manufacturing systems provide the ...
Numerical modelling of the drag finishing process at a macroscopic scale to optimize surface roughness improvement on additively manufactured (SLM) Inconel 718 parts
(Elsevier B.V., 2022)
Drag finishing is one of the mass finishing processes that enhances surface roughness on complex and rough parts produced by additive manufacturing. This paper proposes a model to simulate abrasive media flowing around the ...