Bilatu
3041-tik 3001-3020 emaitza erakusten
Transport properties of the binary mixtures of the three organic liquids toluene, methanol, and cyclohexane
(AIP Publishing, 2017)
We report on the measurements of diffusion (D), thermodiffusion (DT), and Soret (ST) coefficients in binary pairs of the ternary system toluene-methanol-cyclohexane using different instrumental techniques: microgravity ...
Hybrid ac/dc microgrids. Part II : Review and classification of control strategies
(Elsevier, 2015)
Microgrids are envisioned as one of the most suitable alternatives for the integration of distributed generation units in the utility grid, as they efficiently combine generation, energy storage and loads in the same ...
Procedure to predict residual stress pattern in spray transfer multipass welding
(Springer, 2015)
Gas metal arc welding (GMAW) is one of the most used joining method in the industry. However, one of the main problems of this process is the generation of residual stresses which have direct impact on the fatigue life of ...
Digital Interferometry Applied to Thermogravitational Technique
(Springer, 2018)
In this work, we have applied Optical Digital Interferometry approach to thermogravitational micro-column technique. By the new analysis, we examine the entire height of the micro-column and determine the complete concentration ...
Thermodiffusion Coefficients of Water/Ethanol Mixtures for Low Water Mass Fractions
(Springer, 2016)
The difficulty of measuring the thermodiffusion coefficients by optical properties of water-ethanol binary mixtures of approximately 20 wt % of water has been highlighted by several authors in recent years. This is because ...
EraLan ikerketa-proiektua 3 : Euskararen erabilera lan munduan
(Soziolinguistika Klusterra, 2015)
EraLan ikerketa-proiektua da, izaera ezberdineko erakundeen arteko lankidetzaren bitartez gauzatzen
dena. Lan-arloan ematen den hizkuntzen erabilera da proiektuaren aztergai nagusia, eta gai horren inguruan Soziolinguistika ...
Optimizing Polymer Lab-on-Chip Platforms for Ultrasonic Manipulation: Influence of the Substrate
(MDPI, 2015)
The choice of substrate material in a chip that combines ultrasound with microfluidics for handling biological and synthetic microparticles can have a profound effect on the performance of the device. This is due to the ...
Model/framework for addressing continuous improvement projects effectively and efficiently using Six Sigma methodology. Case study of automotive auxialiry company
(Polish Academy of Sciences, 2013)
The purpose of this work is to develop a model for implementing an effective and efficient Continuous Improvement projects, aimed at increasing the performance of production processes. In particular, it aims to innovate ...
Performance and internationalization effects of the use of ICT in diversified companies
(Universidad Politécnica de Cartagena, 2018)
The relationship between Information and Communication Technologies (ICT) and business performance has been a topic of great importance for academics from different areas for several decades. In this sense, this study ...
Desarrollo de competencias y habilidades a través de proyectos basados en empresas reales : análisis en asignaturas de Dirección de OperacionesTeaching Operations Management through real case studies: development of skills and competences
(AECA, Universidad de Sevilla, 2015)
The main aim of our work is to show how a student may get competences and skills through the development of real case studies. We implement this study in Operations Management courses of different Spanish universities. The ...
Characterization of Ti64 forging friction factor using ceramic coatings and different contact conditions
(Elsevier, 2017)
Hot forging processes are highly influenced by the contact conditions between the billet and the dies. A wrong definition of the contact conditions may lead to wrong predictions of the final component geometry, the quantity ...
Influence of tool wear on residual stresses when turning Inconel 718
(Elsevier, 2016)
This paper analyzes the effect of tool wear on residual stresses when turning. Inconel 718 discs were machined for prolonged periods at several cutting speeds, feed-rates and depth of cut. Tests were interrupted to measure ...
The use of wikis in a CLIL-POI context as tools for collaborative writing: impact of attitudes
(Mondragon Unibertsitatea. Humanitate eta Hezkuntza Zientzien Fakultatea, 2012)
Taking into account some of the main aspects regarding changes promoted by the Knowledge Society and their impact on education, the aim of the present study is to explore contextual factors which impact on the development ...
DC-link Voltage Balancing Strategy based on SVM and Reactive Power Exchange for a 5L-MPC Back-to-Back Converter for Medium Voltage Drives
(IEEE, 2016)
The reduced capability of multilevel converters with more than one intermediate node to balance the dc-link capacitors voltage, as well as the lack of standard modulation methods to improve their balancing performance, ...
Simple voltage balancing method to protect series-connected devices experimentally verified in a 5L-MPC converter
(IEEE, 2018)
This paper presents a solution for the voltage balance problem of the series-connected devices that can be applied to multilevel converters in which the series-connected devices need to block twice their switched voltage. ...
A Performance Study of a Horizontal-axis Micro-turbine in a Numerical Wave Flume
(Elsevier Ltd., 2017)
Numerical studies of performance of a 3-bladed Savonius type horizontal-axis wave energy converter are presented. Numerical simulations based on a volume of fluid (VOF) method coupled with a finite volume method (FVM) ...
Optimization of the CRTM process by means of monitoring techniquesOptimización del CRTM mediante técnicas de monitorizado de procesos
(Scipedia, 2018)
In this work the feasability of the monitoring system, composed of flow-rate and injection pressure sensors, in addition to the pressure sensors integrated in the mold, is demonstrated to determine the optimal process ...
Identificación de los aspectos clave de la economía circular para su inclusión en el diseño para el ciclo de vidaIdentification of key aspects of circular economy for inclusion in life cycle design
(AEIPRO, 2019)
La sostenibilidad de la sociedad va a requerir cambios en las personas, en las organizaciones y en las administraciones públicas. La economía circular se postula como un elemento tractor de ese cambio. Pero, ¿cómo abordar ...
Lithium-ion Capacitor Safety Assessment under Electrical Abuse Tests based on Ultrasound Characterization and Cell Opening
(Elsevier, 2019)
Safety issues related to lithium-ion batteries are a driving force in the search for new energy storage systems. Lithium-ion capacitors are becoming recognised as promising devices to address the question of safety. These ...
DFA-LC: metodología de diseño para el montaje considerando el ciclo de vida del productoDFA-LC: design for assembly methodology considering the product life cycle
(AEIPRO, 2019)
Las metodologías Design for Assembly (DFA) ayudan al diseñador a tener en cuenta el proceso de montaje durante las fases de desarrollo de un producto (especificaciones, diseño conceptual y diseño en detalle), de esta forma ...