Performance Evaluation of Small Wind Turbines Under Variable Winds of Cities: Case Study Applied to an Ayanz Wind Turbine with Screw Blades

Abstract

Small wind turbines placed at city locations are affected by variable-speed winds that frequently change direction. Architectural constructions, buildings of different heights and abrupt orography of Cities make the winds that occur at City locations more variable than in flat lands or at sea. However, the performance of Small-wind turbines under this type of variable wind has not been deeply studied in the specialised literature. Therefore, this article analyses the behaviour of small wind turbines under variable and gusty winds of cities, also considering three types of power electronics conversion configurations: the generally used Maximum Power Point Tracking (MPPT) configuration, the simple only-rectifier configuration and an intermediate configuration in terms of complexity called pseudo-MPPT. This general-purpose analysis is applied to a specific type of wind turbine, i.e., the Ayanz wind turbine with screw blades, which presents adequate characteristics for city locations such as; safety, reduced visual and acoustic impacts and bird casualties avoidance. Thus, a wide simulation and experimental tests-based analysis are carried out, identifying the main factors affecting the maximisation of energy production of small wind turbines in general and the Ayanz turbine in particular. It is concluded that the mechanical inertia of the wind turbine, often not even considered in the energy production analysis, is a key factor that can produce decrements of up to 25% in energy production. Then, it was also found that electric factors related to the power electronics conversion system can strongly influence energy production. Thus, it is found that an adequate design of a simple pseudo-MPPT power conversion system could extract even 5% more energy than more complex MPPT configurations, especially in quickly varying winds of cities.