Registro sencillo

dc.rights.licenseAttribution 4.0 International*
dc.contributor.authorHurtado, Iñaki
dc.contributor.otherAldanondo Begiristain, Egoitz
dc.contributor.otherVivas, Javier
dc.contributor.otherÁlvarez, Pedro
dc.contributor.otherKaranika, Alexandra
dc.date.accessioned2021-06-07T14:20:15Z
dc.date.available2021-06-07T14:20:15Z
dc.date.issued2021
dc.identifier.issn2075-4701en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=163738en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/5311
dc.description.abstractThe feasibility for friction stir welding (FSW) surface-treated AA2099-T83 aluminium extrusions with AA2060-T8E30 aluminium sheets in the overlap configuration and using a sealant at the interface was investigated in this work. New Cr-free surface treatments such as thin film sulphuric acid anodising (TFSAA) and sol–gel were applied to the parent materials, and a sealant was applied before applying the FSW process. FSW welds were produced using several combinations of surface treatments and sealant application with no significant influence on FSW process stability and performance. The metallographic examination of the welds showed that a good protection of the crevice was achieved with some sealant ccumulation at the edges of the overlapping region. The microstructural analysis showed no sealant remnants but the presence of some oxide remnants in the stir zone (SZ) of the welds, especially in the TFSAA treated parent material cases. However, these remnants did not show any significant effect in the static pull-out strength of the joints and failures at the most stressed zone of the AA2099-T83 extrusions outside the FSW weld region were consistently obtained.en
dc.description.sponsorshipComisión Europeaes
dc.language.isoengen
dc.publisherMDPIen
dc.rights© 2021 by the authors. Licensee MDPIen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectfriction stir weldingen
dc.subjectlap jointen
dc.subjectsurface treatmenten
dc.subjectthin film sulphuric acid anodizingen
dc.subjectsol–gelen
dc.subjectsealanten
dc.subjectaluminiumen
dc.subjectaeronauticen
dc.titleFriction Stir Welding of AA2099-T83 and AA2060-T8E30 Aluminium Alloys with New Cr-Free Surface Treatments and Sealant Applicationen
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceMetalsen
local.contributor.groupProcesos avanzados de conformación de materialeses
local.description.peerreviewedtrueen
local.identifier.doihttps://doi.org/10.3390/met11040644en
local.relation.projectIDinfo:eu-repo/grantAgreement/EC/H2020/807083/EU/Airframe ITD/GAM AIR 2018en
local.rights.publicationfeeAPCen
local.rights.publicationfeeamount1646 EURen
local.embargo.enddate2021
local.contributor.otherinstitutionhttps://ror.org/04z0p3077es
local.contributor.otherinstitutionhttps://ror.org/04mngjf23es
local.source.detailsVol. 11. N. 4. N. artículo 644, 2021en
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_6501en
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85en


Ficheros en el ítem

Thumbnail
Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(es)

Registro sencillo

Attribution 4.0 International
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution 4.0 International