Bilatu
49-tik 31-40 emaitza erakusten
Development and Comparison of Rule- and Machine Learning-Based EMS for HESS Providing Grid Services
(IEEE, 2024)
In this paper, a smart machine-learning-based energy management system (MLBEMS) is developed for a hybrid energy storage system (HESS). This HBESS consists of batteries with high-energy (HE) and high-power (HP) characteristics, ...
Zero-sequence controller requirements and comparison for a delta-CHB STATCOM under unbalanced operation
(Elsevier, 2024)
Delta-configured Cascaded H-Bridge (DCHB) topology is a suitable alternative for Static Synchronous Compensator (STATCOM) applications. However, under unbalanced voltage and/or current conditions, zero-sequence current ...
The effect of small perturbation on dynamics of absorptive LiBr–water solution
(AIP Publishing, 2024)
In a binary solution of lithium bromide–water, even a small disturbance in the initial homogeneous mass fraction at the absorbing interface has profound effects on the entire system dynamics. This perturbation of absorption ...
Impact behaviour of bio-inspired sandwich panels integrally manufactured from 3D printed continuous carbon fibre reinforced polyamide
(2024)
This paper studies the effect of several design parameters on the impact performance of fully 3D printed sandwich panels with a core cell unit inspired by the trabecular structure of the forewing of a beetle. The key finding ...
High-temperature tribological performance of functionally graded Stellite 6/WC metal matrix composite coatings manufactured by laser-directed energy deposition
(Springer, 2024)
Wear-driven tool failure is one of the main hurdles in the industry. This issue can be addressed through surface coating with ceramic-reinforced metal matrix composites. However, the maximum ceramic content is limited by ...
Hole quality improvement in CFRP/Ti6Al4V stacks using optimised flow rates for LCO2 and MQL sustainable cooling/lubrication
(Elsevier, 2024)
Carbon fibre reinforced polymer/titanium stacks (CFRP/Ti6Al4V) are employed in aeronautics due to their excellent weight-to-strength ratio and corrosion properties. However, these same material properties present challenges ...
Probabilistic feature selection for improved asset lifetime estimation in renewables. Application to transformers in photovoltaic power plants
(Elsevier, 2024)
The increased penetration of renewable energy sources (RESs) as an effective mechanism to reduce carbon emissions leads to an increased weather dependency for power and energy systems. This has created dynamic operation ...
Towards tailored surface topography on electrospun wound dressings for exudate absorption
(Emerald, 2024)
Since electrospinning can generate micro- to nanometre-scale fibres, it is widely used for fabricating wound dressings. Electrospun scaffolds with defined three-dimensional patterns at the mat surface can be efficiently ...
Impact and notched strength of multiaxially reinforced out of die UV cured pultruded profiles
(Wiley, 2024)
The present paper highlights the benefits of multiaxially reinforced profiles manufactured by out of die ultraviolet (UV) cured pultrusion. Thanks to the low pulling forces inherent to this technology, we could manufacture ...
Transdisciplinary humanities for social transformation: The Global Digital Humanities degree at Mondragon University AS Fabrik
(Berghahn Journals, 2024-03-01)
The new degree in the Global Digital Humanities has been launched
by the Faculty of Humanities and Education at Mondragon University
on its new urban campus of Bilbao AS Fabrik. In a time of increas-
ing urbanisation, ...