Simple record

dc.rights.licenseAttribution 4.0 International*
dc.contributor.authorGil Acedo, Imanol
dc.contributor.authorGaldos Errasti, Lander
dc.contributor.authorOtegi Martínez, Nagore
dc.contributor.authorMendiguren Olaeta, Joseba
dc.contributor.authorSaénz de Argandoña, Eneko
dc.date.accessioned2020-04-02T15:11:46Z
dc.date.available2020-04-02T15:11:46Z
dc.date.issued2018
dc.identifier.issn1757-8981en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=153718en
dc.identifier.urihttp://hdl.handle.net/20.500.11984/1617
dc.description.abstractThe competitiveness of the automotive sector has led to a high demand of accuracy and reduction in lead-time of the deep drawing tool making process. In that regard, the numerical simulation of the deep drawing process has become a key method for the correct die design. Even though the accuracy of these simulations reached some high quality levels in terms of formability and defects, the material holding force remains an open issue among the die maker companies. This inaccuracy is related with the inability of shell elements to correctly reproduce the behavior of the material around the drawbeads. In order to overcome this problem, commercial stamping software used an analytical model to predict the drawbead holding forces. Nevertheless, most of these models are based on an experimental methodology developed in the 70's that do not exactly represent the industrial drawbead configuration. In order to be able to experimentally analyze the necessary up-lift force of each drawbead, in this work a new experimental procedure is presented. A wide range of automotive sector materials, ranging from mild steels up to high strength steels, have been tested and new values, compared with previous experiments, have been found. In that regard, the force distribution on the drawbead is also studied stressing the importance of the flat surfaces around the drawbead more than the drawbead punch itself.en
dc.description.sponsorshipGobierno de Españaes
dc.language.isoengen
dc.publisherIOP Publishing Ltd.en
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.titleOn the accurate characterization of the drawbead up-lift forcesen
dc.typeinfo:eu-repo/semantics/articleen
dcterms.accessRightsinfo:eu-repo/semantics/openAccessen
dcterms.sourceIOP Conference Series: Materials Science and Engineering. Vol. 418. Nº 1. Institute of Physics Publishing. 21 September, 2018en
dc.description.versioninfo:eu-repo/semantics/publishedVersionen
local.contributor.groupProcesos avanzados de conformación de materialeses
local.description.peerreviewedtrueen
local.identifier.doihttp://dx.doi.org/10.1088/1757-899X/418/1/012092en
local.relation.projectIDGE/Retos-Colaboración del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016. RTC-2015-3643-4/ES/Nueva generación de troqueles más estables y con vida útil prolongada para el conformado de aceros avanzados de alto límite elástico para automoción/HRDen


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Simple record

Attribution 4.0 International
Except where otherwise noted, this item's license is described as Attribution 4.0 International