Simple record

dc.contributor.authorSoler Mallol, Daniel
dc.contributor.authorArrazola Arriola, Pedro José
dc.contributor.authorAristimuño Osoro, Patxi Xabier
dc.contributor.authorSaez de Buruaga Echeandia, Mikel
dc.contributor.authorGaray Araiko, Ainara
dc.date.accessioned2019-01-16T12:02:09Z
dc.date.available2019-01-16T12:02:09Z
dc.date.issued2018
dc.identifier.issn1359-4311eu_ES
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=146026eu_ES
dc.identifier.urihttp://hdl.handle.net/20.500.11984/1134
dc.description.abstractA new method for measuring temperature in the rake face of a tool during dry orthogonal cutting using ther- mography is presented. In addition, a new technique is also used to calibrate the infrared camera. Using this technique, real temperature values from camera response are directly obtained without the need for emissivity correction. Emissivity is thus not an uncertainty source. These techniques were applied to machining AISI 4140. Rake face temperatures are reported and correlation with cutting forces outlined. The set-up effectively showed temperature distribution on the rake face.eu_ES
dc.description.sponsorshipGobierno Vascoeu_ES
dc.description.sponsorshipGobierno de Españaeu_ES
dc.language.isoengeu_ES
dc.publisherElsevier Ltd.eu_ES
dc.rights© 2018 Elsevier Ltd.eu_ES
dc.subjectTemperature measurementeu_ES
dc.subjectInfrared thermographyeu_ES
dc.subjectMetal cuttingeu_ES
dc.subjectOrthogonal cuttingeu_ES
dc.titleNew Calibration method to measure Rake Face Temperature of the tool during Dry Orthogonal Cutting using Thermographyeu_ES
dc.typeinfo:eu-repo/semantics/articleeu_ES
dcterms.accessRightsinfo:eu-repo/semantics/embargoedAccesseu_ES
dcterms.sourceApplied Thermal Engineeringeu_ES
dc.description.versioninfo:eu-repo/semantics/acceptedVersioneu_ES
local.contributor.groupMecanizado de alto rendimientoeu_ES
local.description.peerreviewedtrueeu_ES
local.description.publicationfirstpage74eu_ES
local.description.publicationlastpage82eu_ES
local.identifier.doihttps://doi.org/10.1016/j.applthermaleng.2018.03.056eu_ES
local.relation.projectIDGV/Convocatoria de ayudas a la Investigación básica y-o aplicada 2014-2015/PI_2014_1_116/CAPV/Estudio de la influencia de la microestructura de aceros y superaleaciones base níquel en la maquinabilidad e integridad superficial de componentes mecanizados/MICROMAQUINTEeu_ES
local.relation.projectIDGE/Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, Convocatoria 2015, Modalidad 1: Proyectos de I+D+I/DPI2015-67667-C3-3-R/ES/Modelización y análisis experimental del proceso de mecanizado en la escala micro/EMULATEeu_ES
local.embargo.enddate2020-04-01
local.source.detailsVol. 137. Pp. 74-82. 5 June,eu_ES


Files in this item

Thumbnail

This item appears in the following Collection(s)

Simple record