Tool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM

Aldeiturriaga Olabarri, Naiara; ARRAZOLA, PEDRO JOSE

Ikusi/Ireki

Tool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM.pdf (2.505Mb)

Erregistro osoa

Eragina

Partekatu

Gorde erreferentzia

Izenburua

Tool wear for finishing milling of green thermoplastic-ceramic composites fabricated with pellet AM

Beste instituzio

Université de Mons (Bélgica)
https://ror.org/02x4mx473

Bertsioa

Bertsio argitaratua

Eskubideak

Sarbidea

Sarbide irekia

URI

https://hdl.handle.net/20.500.11984/6326

Argitaratzailearen bertsioa

https://doi.org/10.1016/j.procir.2023.09.235

Non argitaratua

Procedia CIRP Vol 121. Pp. 97-102

Argitaratzailea

Elsevier

Gako-hitzak

hybrid manufacturing
green ceramics
wear monitoring
pellet additive manufacturing ... [+]

hybrid manufacturing
green ceramics
wear monitoring
pellet additive manufacturing
milling [-]

Laburpena

The wear of milling tools used for finishing green ceramics shaped by pellet additive manufacturing can be challenging. This article aims to evaluate the tool life of a tool, initially dedicated to thermoplastics, when used for milling green zirconia and seeks to confirm the influence of the build direction on the cutting forces. The tool can withstand 30 minutes of milling without reaching the tool life criteria of ISO 8688. The generated surfaces exhibited a shiny finish, no material pull out and a Ra < 1.6 µm. The cutting forces were low with maximal values of 15 N. [-]