Registro sencillo

dc.rights.licenseAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.contributor.authorARRAZOLA, PEDRO JOSE
dc.contributor.otherMalkorra Sarasola, Irati
dc.contributor.otherSalvatore, Ferdinando
dc.contributor.otherRech, Joël
dc.contributor.otherTardelli, Joffrey
dc.contributor.otherMathis, Aude
dc.date.accessioned2022-07-28T06:25:42Z
dc.date.available2022-07-28T06:25:42Z
dc.date.issued2020
dc.identifier.issn2212-8271en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=162845en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/5642
dc.description.abstractTribofinishing is one of the most popular polishing process in industry. The action of small abrasive media around parts enables to reduce significantly surface roughness and at the same time, to induce compressive residual stresses in the external surface layer. However, few scientific investigations have been made about this process. Whereas most of the previous works were focused on the effect of abrasive grains, the influence of lubrication and especially the filtering of the lubricant on the surface integrity have never been investigated before. This paper aims to study the influence of the presence of debris coming from the part and the media in the polishing process. For that purpose, rough surface parts (Ra~15 µm) have been tribofinished without and with lubrication filtering. Roughness parameters (Ra, RSm and Rsk), the offset between surface profiles and residual stresses have been compared. It is revealed that the lack of filtering leads to the presence of debris coming from the part and the media. This modifies tremendously the action of the media and prevent the surface from being polished properly. The reduction of roughness is saturated and the material is excessively deformed as a consequence of debris incrustations in the surface.en
dc.language.isoengen
dc.publisherElsevier Ltden
dc.rights© 2020 The Authorsen
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectdrag finishingen
dc.subjectSurface modificationen
dc.subjectLubricationen
dc.titleInfluence of lubrication condition on the surface integrity induced during drag finishingen
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceProcedia CIRPen
local.contributor.groupMecanizado de alto rendimientoes
local.description.peerreviewedtrueen
local.description.publicationfirstpage245en
local.description.publicationlastpage250en
local.identifier.doihttps://doi.org/10.1016/j.procir.2020.02.087en
local.contributor.otherinstitutionhttps://ror.org/0199zgv94fr
local.contributor.otherinstitutionhttps://ror.org/01rk35k63fr
local.contributor.otherinstitutionNaval Group CESMANfr
local.source.detailsVol. 87. Pp. 245-250, 2020en
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_6501en
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85en


Ficheros en el ítem

Thumbnail
Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(es)

Registro sencillo

Attribution-NonCommercial-NoDerivatives 4.0 International
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution-NonCommercial-NoDerivatives 4.0 International