Registro sencillo

dc.contributor.authorTorca, Ireneo
dc.contributor.otherEscalero, Mikel
dc.contributor.otherZabala, Haritz
dc.contributor.otherBlasón, Sergio
dc.contributor.otherUrresti, Iker
dc.contributor.otherFernández Canteli, Alfonso
dc.contributor.otherMuniz-Calvente, Miguel
dc.date.accessioned2022-07-05T13:30:28Z
dc.date.available2022-07-05T13:30:28Z
dc.date.issued2018
dc.identifier.issn0141-0296en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=148665en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/5623
dc.description.abstractThe objective of this work is to establish pertinent criteria allowing an optimal alternative to be chosen for calculating the inputs needed to make Run/Repair/Replace decisions and to program inspection plans for cracked wind turbine bearing rings. With this aim, the growth of a hole-edge through-crack was predicted analytically, simulated and measured in a 42CrMo4 steel plate subjected to mode-I cyclic loading. Different alternative procedures according to BS 7910:2013 fitness-for-service code were implemented. Unexpectedly, the numerical calculation of the local stresses in the uncracked body did not improve the estimations of the critical crack length and the number of cycles to failure performed following purely analytical alternatives. That alternative underestimated the critical crack length by 50%. Among the alternatives studied, the one based on numerically calibrated stress intensity factors and crack growth coefficients characterized at the corresponding stress ratios proved to be the most suitable one. Following that alternative, the fatigue life was found to be overestimated by 3.96% in the best scenario whereas the critical crack length was underestimated with an error less than 3%, determined using the Failure Assessment Diagram (FAD) as a failure criterion.es
dc.language.isoengen
dc.publisherElsevieren
dc.rights© 2018 Elsevier Ltd. All rights reserved.en
dc.subjectFatigue crack growthen
dc.subjectFitness-for-serviceen
dc.subjectBearing ringen
dc.subjectBS 7910:2013en
dc.subjectAlternative predictionsen
dc.subjectExperimental validationen
dc.titleStudy of alternatives and experimental validation for predictions of hole-edge fatigue crack growth in 42CrMo4 steelen
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceEngineering Structuresen
local.contributor.groupDiseño y mecánica estructurales
local.description.peerreviewedtrueen
local.description.publicationfirstpage621en
local.description.publicationlastpage631en
local.identifier.doihttps://doi.org/10.1016/j.engstruct.2018.09.017en
local.contributor.otherinstitutionhttps://ror.org/03hp1m080es
local.contributor.otherinstitutionhttps://ror.org/006gksa02es
local.source.detailsVol. 176. Pp. 621-631. 1 December, 2018en
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_6501en
oaire.versionhttp://purl.org/coar/version/c_ab4af688f83e57aaen


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(es)

Registro sencillo