Simple record

dc.rights.licenseAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.contributor.authorMadariaga, Aitor
dc.contributor.authorKortabarria, Aitor
dc.contributor.authorHormaetxe Fernández, Exabier
dc.contributor.authorGaray, Ainara
dc.contributor.authorARRAZOLA, PEDRO JOSE
dc.date.accessioned2022-04-29T09:53:33Z
dc.date.available2022-04-29T09:53:33Z
dc.date.issued2016
dc.identifier.issn2212-8271en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=121739en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/5554
dc.description.abstractThis paper analyzes the effect of tool wear on residual stresses when turning. Inconel 718 discs were machined for prolonged periods at several cutting speeds, feed-rates and depth of cut. Tests were interrupted to measure and relate tool wear with the subsequent residual stress measurements. The discussion of experimental results is supported by orthogonal cutting simulations. It was found a critical tool wear where tensile surface residual stresses were maximum, decreasing for lower and higher values of tool wear. Nevertheless, it was observed that the compressive residual stress layer increased with increasing tool wear.en
dc.description.sponsorshipGobierno Vasco-Eusko Jaurlaritzaes
dc.language.isoengen
dc.publisherElsevieren
dc.rights© 2016 The Authorsen
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectResidual Stressen
dc.subjectTurningen
dc.subjectWearen
dc.titleInfluence of tool wear on residual stresses when turning Inconel 718en
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceProcedia CIRPen
local.contributor.groupMecanizado de alto rendimientoes
local.description.peerreviewedtrueen
local.description.publicationfirstpage267en
local.description.publicationlastpage270en
local.identifier.doihttps://doi.org/10.1016/j.procir.2016.02.359en
local.relation.projectIDinfo:eu-repo/grantAgreement/GV/ETORTEK 2014/IE14-396/CAPV/Investigación en tecnologías de fabricación avanzada en líneas estratégicas para la industria de Euskadi/ESTRATEUSen
local.relation.projectIDinfo:eu-repo/grantAgreement/GV/Retos-Colaboración del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad/RTC-2014-1861-4/CAPV/Desarrollo de sistemas de fabricación de alta fiabilidad para piezas rotativas con altos requisitos de integridad superficial - II/DESAFIO IIen
local.source.detailsVol. 45. Pp. 267–270, 2016en
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_c94fen
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85en


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Simple record

Attribution-NonCommercial-NoDerivatives 4.0 International
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 International