Compartir
Guarda la referencia
Título
Hole quality analysis of AISI 304-GFRP stacks using robotic drillingAutor-a
Otras instituciones
Université de Mons (Bélgica)Versión
Version publicada
Derechos
© 2022 The Authors. Published by Elsevier B.VAcceso
Acceso abiertoVersión del editor
https://doi.org/10.1016/j.procir.2022.03.068Publicado en
Procedia CIRP. Vol. 108. N. C. Pp. 436-441, 2022Editor
Elsevier B.V.Palabras clave
RoboticsDrilling
Stacks
Resumen
Although drilling of FRP - metal stacks is the most widely used machining operation for these materials, it remains challenging in many aspects (tool wear, vibrations, delamination, poor surface finis ... [+]
Although drilling of FRP - metal stacks is the most widely used machining operation for these materials, it remains challenging in many aspects (tool wear, vibrations, delamination, poor surface finish, etc). In this context, this paper presents an analysis of drilled AISI 304-GFRP stacks using a 6 axis Staubli TX200 robot, which is a technology increasingly used in applications such as aeronautics due to the advantages it o ¨ ffers (spatial accessibility, productivity, flexibility). This study focuses on hole quality based on appropriate criteria (burrs, surface roughness, roundness and delamination measurements) depending on a large range of cutting parameters. [-]
Colecciones
- Congresos - Ingeniería [377]
El ítem tiene asociados los siguientes ficheros de licencia:
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution-NonCommercial-NoDerivatives 4.0 International
