Título
Effect of innovative finishing operations on the tribological performance of steel 27MnCr5Autor-a
Autor-a (de otra institución)
Otras instituciones
Université de LyonCentro Ricerche Fiat
Versión
Version publicada
Derechos
© 2022 The Authors. Published by Elsevier B.V.Acceso
Acceso abiertoVersión del editor
https://doi.org/10.1016/j.procir.2022.03.080Publicado en
Procedia CIRP Vol. 108. Pp. 513-518, 2022Editor
Elsevier Ltd.Palabras clave
belt finishing
Grinding
Cryogenic
Surface Integrity ... [+]
Grinding
Cryogenic
Surface Integrity ... [+]
belt finishing
Grinding
Cryogenic
Surface Integrity
Tribology [-]
Grinding
Cryogenic
Surface Integrity
Tribology [-]
Resumen
Transmission shafts used in the automotive sector must have a good tribological performance, and therefore an enhanced surface integrity. This paper aims to study the effect of eco-friendly innovative ... [+]
Transmission shafts used in the automotive sector must have a good tribological performance, and therefore an enhanced surface integrity. This paper aims to study the effect of eco-friendly innovative finishing operations (belt finishing, cryogenic grinding and dry grinding) on the surface integrity and tribological performance of steel grade 27MnCr5, and compare to the behavior of components produced by conventional wet grinding process. For that purpose, a total of seven finishing conditions were analysed: wet grinding as reference, two dry grinding conditions, two cryogenic grinding conditions and two hard turning+belt finishing conditions. The surface integrity (roughness, residual stresses, hardness and microstructural defects) of samples was assessed. Finally, the step-loading test method was used to determine the scuffing resistance of the samples. Tested innovative finishing operations led to higher scuffing resistance than conventional wet grinding. Results demonstrate that higher surface hardness and roughness leads to higher scuffing resistance, while the effect of surface residual stresses is not significant. [-]
Sponsorship
Comisión EuropeaID Proyecto
nfo:eu-repo/grantAgreement/EC/RFCS/RFCS-2018-847284/EU/Improvement of the fatigue performance of automotive components through innovative ecofriendly finishing operations/FATECOColecciones
- Congresos - Ingeniería [364]
El ítem tiene asociados los siguientes ficheros de licencia: