Simple record

dc.rights.licenseAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.contributor.authorMartin-Mayor, Alain
dc.contributor.authorSouto, Iñigo
dc.contributor.authorBou-Ali, M. Mounir
dc.contributor.otherParellada-Monreal, Laura
dc.contributor.otherGarcía Mandayo, Gemma
dc.date.accessioned2022-11-23T07:53:08Z
dc.date.available2022-11-23T07:53:08Z
dc.date.issued2022
dc.identifier.issn0925-4005en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=167715en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/5874
dc.description.abstractIn this article, CFD simulations results are presented as a key tool to the comprehension of the target gas concentration evolution in a test chamber, at different working conditions. The simulation results are compared with the experimental data, which shows a qualitative good correlation with the evolution of the concentration gradient detected. The experiments were carried out using an aluminum gas test chamber, where a WO3 based conductometric sensor is introduced. The results demonstrate how the response time is dependent on the sensor working conditions. Analyzing the CFD and experimental results, some assumptions for this behavior are proposed. The WO3 sensor needs a Pt heating element, which is heated up to 300 °C. As the response is highly temperature-dependent, the temperature distribution on the sensor surface was measured by an IR thermographic camera. The simulation results show that the temperature distribution matches with those obtained experimentally. To validate the model, a mesh and time step convergence study was also implemented.en
dc.description.sponsorshipGobierno Vasco-Eusko Jaurlaritzaes
dc.language.isoengen
dc.publisherElsevieren
dc.rights© 2022 The Authorsen
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectComputational fluid dynamics (CFD)en
dc.subjectConductometric gas sensoren
dc.subjectGas flowen
dc.subjectChamber-position influenceen
dc.titleInfluence of the test-chamber shape on the performance of conductometric gas sensorsen
dc.typeinfo:eu-repo/semantics/articleen
dcterms.accessRightsinfo:eu-repo/semantics/openAccessen
dcterms.sourceSensors and Actuators B: Chemicalen
dc.description.versioninfo:eu-repo/semantics/publishedVersionen
local.contributor.groupMecánica de fluidoses
local.description.peerreviewedtrueen
local.identifier.doihttps://doi.org/10.1016/j.snb.2022.131694en
local.relation.projectIDinfo:eu-repo/grantAgreement/GV/Elkartek 2021/KK-2021-00082/CAPV/Microtecnologías como motor de desarrollo de Microsistemas avanzados integrados en la Fábrica Inteligente y Digital en el marco de la IIoT4.0/μ4IIOTen
local.contributor.otherinstitutionhttps://ror.org/022wqqf69es
local.contributor.otherinstitutionhttps://ror.org/02rxc7m23es
local.source.detailsVol. 361. N. artículo 131694. June, 2022en
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Simple record

Attribution-NonCommercial-NoDerivatives 4.0 International
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivatives 4.0 International