Registro sencillo

dc.rights.licenseAttribution 4.0 International*
dc.contributor.authorARRAZOLA, PEDRO JOSE
dc.contributor.otherKugalur-Palanisamy, Nithyaraaj
dc.contributor.otherRivière-Lorphèvre, E.
dc.contributor.otherDucobu, François
dc.date.accessioned2022-05-09T14:46:07Z
dc.date.available2022-05-09T14:46:07Z
dc.date.issued2021
dc.identifier.isbn978-287019302-0en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=166685en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/5570
dc.description.abstractThe highly used Ti6Al4V alloy is a well know hard-to-machine material. The modelling of orthogonal cutting process of Ti6Al4V attract the interest of many researchers as it often generates serrated chips. The purpose of this paper is to show the significant influence of cutting speed on chip formation during orthogonal cutting of Ti6Al4V along with different material constitutive models. Finite element analyses for chip formation are conducted for different cutting speeds and are investigated with well-known Johnson-Cook constitutive model, a modified Johnson–Cook model known as Hyperbolic Tangent (TANH) model that emphasizes the strain softening behavior and modified Johnson-Cook constitutive model that consider temperature dependent strain hardening factor. A 2D Lagrangian finite element model is adopted for the simulation of the orthogonal cutting process and the results from the simulations such as calculated forces, chip morphologies are analyzed and are compared with the experimental results to highlight the differences. The results analysis shows that, the temperature in the secondary deformation zone is directly proportional to the cutting speed.en
dc.language.isoengen
dc.rights© 2021 The authorsen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectMachiningen
dc.subjectTi6Al4Ves
dc.subjectFinite element modellingen
dc.subjectAbaqusen
dc.subjectCutting forcesen
dc.subjectonstitutive Modelsen
dc.titleInfluences of Cutting Speed and Material Constitutive Models on Chip Formation and their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulationen
dcterms.accessRightshttp://purl.org/coar/access_right/c_abf2en
dcterms.sourceESAFORM Proceedingsen
local.contributor.groupMecanizado de alto rendimientoes
local.description.peerreviewedtrueen
local.identifier.doihttps://doi.org/10.25518/esaform21.2424en
local.contributor.otherinstitutionhttps://ror.org/02qnnz951es
local.source.detailsN. artículo, 2424, 2021en
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore
oaire.resourceTypehttp://purl.org/coar/resource_type/c_c94fen
oaire.versionhttp://purl.org/coar/version/c_970fb48d4fbd8a85en


Ficheros en el ítem

Thumbnail
Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(es)

Registro sencillo

Attribution 4.0 International
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution 4.0 International