Bilatu
47-tik 1-10 emaitza erakusten
Modelo de evaluación y selección de nuevas tecnologías en un centro tecnológico de manufacturing
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2020)
In today's industrial and social environment, the relevance of technology and R+D+i activities is considered key for the competitiveness and sustainability of companies, both in the developed economies and in developing ...
Cryogenic machining of the aeronautic alloy: Inconel 718
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2021)
Nickel-based alloys are widely used in the manufacture of aerospace engine components due to their excellent high-temperature thermo-mechanical properties and good corrosion resistance. However, machining these materials ...
Determinación de las propiedades termofísicas y propiedades de transporte en mezclas binarias líquidas bajo condiciones de alta presión
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2021)
In this doctoral thesis, mass transport phenomena have been analyzed. These phenomena have becomed a central aspect to study due to their wide application in different fields. In order to experimentally determine properties ...
Computer vision techniques for autonomous vehicles applied to urban underground railway
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2022)
Autonomous vehicles’ presence is becoming a reality in everyday life, with autonomous driving cars on the road, GOA3-GOA4 trains in the railway domain, or automated guided vehicles in the industrial domain. These autonomous ...
Cybersecurity Evaluation Methodology based on Metrics for Industrial Embedded Systems
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2022)
During the last decades, Embedded Systems (ESs) have evolved from isolated systems into a fully connected devices. Today, due to the development of processing capabilities, ESs have the ability to control or manage a wide ...
Milling of Gamma titanium aluminides
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2022)
Gamma Titanium Aluminide (gamma – TiAl) alloys are intermetallics with approximately half the density of nickel based superalloys. Their low density, high specific strength, and good structural integrity at high temperatures ...
Applicability of a Dynamic Recrystallization Model for an Open Die Forging Process for the As-Cast Superaustenitic Stainless Steel Alloy 28
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2022)
In the petrochemical industry, extreme conditions require materials that can withstand high fatigue pressures and highly corrosive environments. In the last decade, the use of super austenitic steels (SASS) has increased ...
Air coupled ultrasonic inspection of fiber reinforced composite materials
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2020)
The increase in the use of composite materials in recent years has led the industry into the development of new composite manufacturing processes, like the 3D ultraviolet pultrusion. These new manufacturing processes usually ...
Simulation-based Metamorphic Testing of Cyber-Physical Systems
(Mondragon Unibertsitatea. Goi Eskola Politeknikoa, 2022)
Cyber-Physical Systems (CPSs) are heterogeneous systems in which software components and physical processes interact with each other. These systems have strict requirements that are difficult to verify, resulting in very ...
High-Power Density DC-DC Converter for More Electric Aircraft
(Mondragon Unibertsitatea. Mondragon Goi Eskola Politeknikoa, 2022)
Nowadays, the large dependency of the current society of the non-renewable energies is encouraging the acceleration of the climatic change, which is having a considerable impact on the environment. Consequently, an impulse ...