Erregistro soila

dc.rights.licenseAttribution 4.0 International*
dc.contributor.authorMoreno, Yerai
dc.contributor.authorAlmandoz, Gaizka
dc.contributor.authorEgea, Aritz
dc.contributor.authorMadina, Patxi
dc.contributor.otherEscalada Aguado, Ana Julia
dc.date.accessioned2020-04-03T15:00:24Z
dc.date.available2020-04-03T15:00:24Z
dc.date.issued2020
dc.identifier.issn1996-1073en
dc.identifier.otherhttps://katalogoa.mondragon.edu/janium-bin/janium_login_opac.pl?find&ficha_no=155937en
dc.identifier.urihttps://hdl.handle.net/20.500.11984/1619
dc.description.abstractSociety is turning to electrification to reduce air pollution, increasing electric machine demand. For industrial mass production, a detailed design of one machine is usually done first, then a design of similar machines, but different ratings are reached by geometry scaling. This design process may be highly time-consuming, so, in this paper, a new sizing method is proposed to reduce this time, maintaining accuracy. It is based on magnetic flux and thermal maps, both linked with an algorithm so that the sizing process of an electrical machine can be carried out in less than one minute. The magnetic flux maps are obtained by Finite Element Analysis (FEA) and the thermal maps are obtained by analytical models based on Lumped Parameter Circuits (LPC), applying a time-efficient procedure. The proposed methodology is validated in a real case study, sizing 10 different industrial machines. Then, the accuracy of the sizing tool is validated performing the experimental test over the 10 machines. A very good agreement is achieved between the experimental results and the performances calculated by the sizing tools, as the maximum error is around 5%.en
dc.language.isoengen
dc.publisherMDPI AGen
dc.rights© The Authorsen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectsizing methodologyen
dc.subjectelectrical machinesen
dc.subjectthermal modelen
dc.subjectelectromagnetic modelen
dc.subjectpermanent magneten
dc.titleMulti-Physics Tool for Electrical Machine Sizingen
dc.typeinfo:eu-repo/semantics/articleen
dcterms.accessRightsinfo:eu-repo/semantics/openAccessen
dcterms.sourceEnergiesen
dc.description.versioninfo:eu-repo/semantics/publishedVersionen
local.contributor.groupAccionamientos aplicados a la tracción y a la generación de energía eléctricaes
local.description.peerreviewedtrueen
local.identifier.doihttps://doi.org/10.3390/en13071651en
local.rights.publicationfeeAPCen
local.rights.publicationfeeamount1.705.05 €
local.contributor.otherinstitutionOrona EICes
local.source.detailsVol. 13. Nº 7. Nº artículo 1651, 2020eu_ES
oaire.format.mimetypeapplication/pdf
oaire.file$DSPACE\assetstore


Item honetako fitxategiak

Thumbnail
Thumbnail

Item hau honako bilduma honetan/hauetan agertzen da

Erregistro soila

Attribution 4.0 International
Bestelakorik adierazi ezean, itemaren baimena horrela deskribatzen da: Attribution 4.0 International